Hi,
I wanted to know which ESCs will be better for Sunnysky 2212 980kv motor (http://www.quadkopters.com/product/brushless-motors/sunnysky-2212-980kv/). Anyone who used this motors with which ESCs?
Thanks in advance.
Regards
Hobby wing X rotor are good.
but it also depends how you are going to use & Fly the quad
Quote from: rastsaurabh on April 07, 2016, 11:16:26 AM
Hobby wing X rotor are good.
but it also depends how you are going to use & Fly the quad
It's for my hex and normally it will for normal flying and aerial video recording. It has more weight around 1.8~2 KG
20A if 3cell with 10 inch
30A if 4cell with 8inch
For 2212 1.8 kg on higher side...... Move to better motor 2312 or something else.
Even 2216 is better.
What about Turnigy Multistar 2213-980kv motor (http://hobbysea.com/products.php?415&sid=473408d37aeb780157dc002132751345) with Turnigy Multistar 20A ESC (http://hobbysea.com/products.php?414&sid=473408d37aeb780157dc002132751345)
Quote from: Inv3nt0r on April 07, 2016, 01:07:21 PM
What about Turnigy Multistar 2213-980kv motor (http://hobbysea.com/products.php?415&sid=473408d37aeb780157dc002132751345) with Turnigy Multistar 20A ESC (http://hobbysea.com/products.php?414&sid=473408d37aeb780157dc002132751345)
Go for the Hobbywing XRotor 20A (http://www.rchyper.com/hobbywing-xrotor-20a-esc-wire-lead.html). It is better than the turnigy esc and also priced at a cheaper rate :)
How are little bee ESCs with SunnySky 980 and 4s/9" props?
Quote from: Cycloned on April 08, 2016, 10:38:26 AM
How are little bee ESCs with SunnySky 980 and 4s/9" props?
Should be nice and snappy. I use the VGood Firefly 30A ARM ESCs and they are super smooth and have excellent braking.
You can buy this Following Escs for your motor.
These all are suitable for your motor.
10amp (OPTO) – Hobbywing X-Rotor 250 size ESC
http://www.rcproduct.in/product/10amp-opto-hobbywing-x-rotor-250-size-esc/
(http://cdn1.rcproduct.in/wp-content/uploads/2016/03/73078-128x94.jpg)
20amp – Hobbywing X-Rotor ESC
http://www.rcproduct.in/product/20amp-hobbywing-x-rotor-esc/
(http://cdn2.rcproduct.in/wp-content/uploads/2016/03/730791-128x94.jpg)
20Amp – Afro ESC Multi-rotor Motor Speed Controller (SimonK Firmware)
http://www.rcproduct.in/product/20amp-afro-esc-multi-rotor-motor-speed-controller-simonk-firmware/
(http://cdn1.rcproduct.in/wp-content/uploads/2016/03/20Amp-Afro-128x94.jpg)
18Amp -TURNIGY Plush Speed Controller w/BEC
http://www.rcproduct.in/product/18amp-turnigy-plush-speed-controller-wbec/
(http://cdn1.rcproduct.in/wp-content/uploads/2016/03/TR-P18A-128x103.jpg)
This all Are Escs Branded and specially for Multirotor so you can use anyone from this.
you can also find more escs here...
http://www.rcproduct.in/product-category/electronic-speed-control/
:hatsoff:
So guys, can you please tell me, with Hobbywing XRotor 20A ESC, how many amount of thrust it will generate with 3s lipo?
Depends on the prop. With a 1045 (a common prop for this motor on 3S) you should get approximately 850g
With 4s? 4s recommended for this motor?