Print Page - Mechanical elevon mixing

Title: Mechanical elevon mixing
Post by: anwar on June 04, 2010, 03:38:11 PM

If your radio does not support elevon/vtail mixing, and you don't have an external vtail mixer, here is a way to do it just using mechanical setup using two servos :thumbsup:

http://www.youtube.com/watch?v=g-nYO778thM

Title: Re: Mechanical elevon mixing
Post by: foamy on June 04, 2010, 04:29:17 PM

Anwar sab,
Ive attached a more simple v-tail mixer sucessfully used in disply superman model flown at hyderabad NCC day in 1988. Way too simple.

prabhat

Title: Re: Mechanical elevon mixing
Post by: anwar on June 04, 2010, 04:39:29 PM

Very interesting ! :thumbsup:

Title: Re: Mechanical elevon mixing
Post by: anwarulhaq on June 22, 2010, 09:50:32 PM

The superman flown in hyderabad was built by me and had a sliding tray for the aileron servo, the sliding tray being moved by a fixed elevator servo. The sliding rails are fabricated with cycle spokes and the runner on the rails was brass tubing fixed to the servo tray.
Anwar ul Haq

Title: Re: Mechanical elevon mixing
Post by: anwar on June 22, 2010, 09:55:22 PM

That is great :thumbsup:

Any pictures of the setup ?

Title: Re: Mechanical elevon mixing
Post by: bmanoj2 on June 22, 2010, 10:06:28 PM

Great Idea man :thumbsup:

RC India

General Topics => RC General Topics => Topic started by: anwar on June 04, 2010, 03:38:11 PM