Hi Comrades,
This happened today.......................... ;D
http://www.assamtribune.com/scripts/epaper.asp?id=Sunday_Reading/Page1
Please scroll down to the bottom of the page.
Cheers!
VC
Bravo. {:)} {:)}
Shifting residence and everything is in a mess. I had left the Internet connection for the last. Soon after this post, they will disconnect the net. Probably will not be active for a few days till things are settled.
Take care all.
VC
Hey congrats :)
Inspiring, you sir are role model material.
Congrats bhaiya...!...awesome...:D:D
You are truly a role model VC bhaiya :salute:
hope it'll create so many modellers..congrats vc sir..
way to go VC, Shifting resi ? why
VC bhaiya are you planning to shift to Kolkata :giggle: :giggle:?
Great VC bai.... {:)} :salute: :bow:
The link vanished so I am posting a scan for those who missed it. This article has had a very good response from the public.
If you download the image and enlarge it a bit, you may be able to read the entire article.
Congrats VC..
The paper guys took a long time to discover you.. :goodjob:
we are taking to celebrities
:bow: :salute:
Celebrities? Perhaps you are right. Everyday I celebrate my failures. Thanks anyway!
what is the significance of success if there is no failure ;)
:thumbsup:
Send me a bigger image, and I will upload it.
Congrats VC!
Ya, couldn't read the article, post a bigger img
Thanks Anwar Sahab. Will do.
Thanks Raja!
yes anwar sir??.
Vineet :headscratch:
VC, please send me the big image.
Quote from: anwar on April 24, 2011, 03:24:46 PM
Send me a bigger image, and I will upload it.
i was looking for a clear pic. it will be good if u upload it.
Still waiting for VC to send it to me.
I have not read it either !
Sir, scans sent. Thanks for your support!
Uploaded : http://www.rcindia.org/myfiles/VC_article1.jpg
Sir, grateful to you for this.
Certain points to be noted about this article. Perhaps we were misunderstood, Simul wood was never mentioned as a "Perfect substitute". Mr. Musawir Mustafa was always a brilliant student and did not attempt and "fail to clear the tests". He didn't join / couldn't join the IAF, for entirely different reasons.
Nevertheless, we are thankful to the Assam Tribune and the reporter, Mr. Goswami, for this excellent article.
that was great article!!!!!
thanks to VC sir!!!
Thanx VC.
There was another mistake in the article, as readers might have noticed, - the principle of lift was wrong.
As for myself, I always wanted to be an engineer and a scientist :headscratch:!! But for the love of flying - to avail the facility of flying in NCC I appeared in the PABT (Pilot Aptitude Battery Test) and cleared it with 90%+ grade; but due to my poor eye sight I didn't pursue a career in flying and wasn't interested in takeing a ground job either in the IAF!! This made me switch to RC. This fulfills both my passion - R&D (read Research & DESTRUCTION) and flying.
Mustafa S. M. Musawir
:o :o :o :o :o
The great guns aren't silent any more..... :hatsoff: Welcome to the forum Boss!
Greatguns as in the CL model??? I guess I am going to love (in the aeromodelling hobby sense) you if you have that as your handle here
Great Guns (Musawir Sir) is a classic aeromodeller himself who has won numerous aeromodelling prizes and awards, pan India. Unfortunately, he is a humble man of few words and I am a man of very little action. I am his spokesperson and I let him do all the work. We get along rather well. :giggle:
Whow, Why I missed the post?
Congratulation Vikramda and Musawirda.
As grategun is expert in electronics, Can I Talk with him as he has the knowledge in electronics and Simultaniously RC Expert to make out low cost Tx+Rx ? But as Chinese materials coming out very cheap and spreading so quickly like hobby, I dont know how relevent it will be.
However, making a uc based or 4017 based Tx, and uC based Rx that can drive directly servo (Infact magnatic actuator with Coil) and small coreless motor with PWM Signal from uC) can be used with IR link and will be very cheap (Of course Made In India). (I Think withen 400Rs.)
It is a dream to make complete control gear assembly with Tx+Rx + motor indigenously to me.
I Got Inspired with your post.Do I have any role to play?
Props can also be made in manual ball press in toy manufacturing unit with nylon granules that costs less (Even for rubber powered too) and of course with balancing or balancing may be a class in workshop. Even, I have made wooden prop with Icecream stck, CA and file (Again Icecream stick with sandpaper sticked on it.). Making and Balancing (Specially dynamic) is really nice and little tough job as hand sanded.
Can We spread this hobby by making it cheaper?, Unitedly.
Do I have any work to support you and your dream (my dream too), I will be obliged by helping. Of course there are others who can also help, but scattered in Kolkata, I found during searching for materials.