What RC activity did you do this week ?

Started by anwar, April 20, 2009, 08:07:39 PM

Previous topic - Next topic

0 Members and 11 Guests are viewing this topic.

raja_mastana

Did my first inverted noise-in today - lasted just few seconds.
Fear of crashing prevented me from trying this till now. Practiced a lot on the sim and was able to do it just fine there. Actual flying is a lot different though.
As soon as the nose turned towards me - i was completely lost. Somehow got it upright without crashing.  :P

Anyways, it brought back memories of my first upright nose in. That time also I was completely lost, the heli flew over my head straight into a wall  :banghead:
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

dheerajjuneja

Hey, congrates! A friend of mine suggested a medicine to calm down the nerves, comes in all sizes of bottles with varing percentage of effectiveness :)
Let's fly!

raja_mastana

ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

dheerajjuneja

ha ha, i am still doing some very basic things, but i am sure it would be effective ...
Let's fly!

dheerajjuneja

Did my first nose in hover today on my heavily modded V120d05

Let's fly!

murcielago

#855
Hi dude,

Good going....Really stable n no tail wag....But, one thing please fly it in more spacious place...I just met with an accident while doing invert practice on my 450, i escaped with a finger injury only as the dx7 took the impact....Even if the size of heli is small it can do a substantial damage due to head speed..

N do join us on some weekend.

Regards


dheerajjuneja

Hi Doc, the heli is very stable and powerful now, not to mention very resistant to crashes as well. Your advice is noted!

I had a small impact of this walkera on my finger and the pain was considerable. I can't even imagine what 450 can do ... God grace. I hope you are fine and back into the hobby?
Let's fly!

anwar

#857
Quote from: dheerajjuneja on October 02, 2012, 10:23:16 PM
...not to mention very resistant to crashes as well.

A crash-resistent heli... can I buy 5 of them ? ;)  Or did you mean the pilot skills have improved,  lowering his "crashes to flights ratio" :) 

Helis are not be messed with... they teach you hard lessons !
Hangar : Please see my introduction.
RC India forum and me : About this forum.

dheerajjuneja

 am afraid there are not much of these helis available ;) it's a v120d05 from walkera heavily modded by using a new much better rx, motor. Head, bearings and blades taken from v120d02s. Main gear modded to use the thicker MS and main gear shear pin changed to use a copper wire of 20 guage etc etc, so you are welcome to make one ...

When I said crash resistant, I literally meant it. From what this heli was in stock form, the MS and FS would bent at the slightest contact, however after modding I have had like 10 crashes and none of them involved any part change so far, only changing the copper wire which will break on impact but save the main gear.

Best is that if you fly this micro heli like on a grass field there is no chance of breaking it at all, so I would advice any one to have this heli for practice or learning, though I am not into 3d as of now, but have heard that it can do moderate 3d with these upgrades, and for full 3d it just needs an even better motor than what I am using I.e. an HP08s 13200kv.
Let's fly!

murcielago

Quote from: dheerajjuneja on October 02, 2012, 10:23:16 PM
Hi Doc, the heli is very stable and powerful now, not to mention very resistant to crashes as well. Your advice is noted!

I had a small impact of this walkera on my finger and the pain was considerable. I can't even imagine what 450 can do ... God grace. I hope you are fine and back into the hobby?

Hi,
My finger is ok, n went for flying on 2nd oct....As Anwar said HELIs are dangerous tings...I was lucky dat the heli was at waist level and was in recovery from invert (n 450 size) ....I pushed the dx7 radio in between which took the main impact...Had it been in forward flight n at face level ....Cant imagine...Thanx to helly flyer n dinesh jindal who came running to the spot with band aid..

Neways...nice flying once again...

allthatido


dheerajjuneja

Hi Ankurkaul17,

I think it's time to change that skills in your signature ;) ... very nice flying, and that music you have chosen with slow downs is really shinning.

Excellent.
Let's fly!

allthatido

Hi Dheeraj

I wish i could fly like that..this was flown by Praddy at our field..i was the cameraman and the video editor :)

dheerajjuneja

Ha ha, the video and music work is also excellent, wishing to see you fly like that soon too ....
Let's fly!

sumitnathwani


murcielago

#865
hI all,

I have been flyin helis for quite some time..wanted to try my hand on airplanes....So, i got hold of  this Yak 54 EPP techone hobbies...This is my 3rd battery on this plane..I guess as a newbee i did ok...My friends Helly flyer and Laxman did the trimming and set up (I can program and set up a heli but not a plane)...

The aileron is too sensitive, so next time will put expo on it...Also, it dips often from its nose.. How to get ridd of this nose dip...??

Nothing fancy bout the video but i njoyed ..



Doc

saurabhhsrivastavaa

Cheers !!!
Saurabh
+91 7977382130

foamybuilder

#867
My fpv flying and testing the autpiliot setup. Still need to do tuning of ap settings.



divay99

Divay Puri
+91-98-119-63278
https://www.facebook.com/#!/groups/NOIDAAEROCLUB/
http://www.amai.in/noida.php
FUTABA T6EX|FUTABA 8FG|SEAGULL 40|SEAGULL FAIRCHILD -PT19|PIPER CUB - 90"|EDGE 540 EP TMPRO|YAK 54 .60| Mustang P51 .40|AXN FLOATER JET|HK Bixler|REACTOR 3D EP|U CAN DO 3D| Blitz SkySurfer|EDF Jet T-45 Goshawk|HK-450 GT PRO|Seagull PC-9 .91|Edge 540 20cc|Reactor 50cc|PC-9 30cc|SU 26 30cc|HK 450 GT|Hirobo Evo .50|MXSR 50cc|Tarot

foamybuilder


hyd_quads

Nice video.. :)
Can you please tell the specs of your FPV system?

saurabhhsrivastavaa

Sujith flying his QUAD...

Please do not mind the annotations....  :giggle:

Cheers !!!
Saurabh
+91 7977382130

saurabhhsrivastavaa

Cheers !!!
Saurabh
+91 7977382130

saurabhhsrivastavaa

Cheers !!!
Saurabh
+91 7977382130

raja_mastana

Thanks Saurabh for the videos  :bow:

I could not shoot the jet properly ... heres whatever is watchable  :P


ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D