Can anybody tell me what to do if 1 pin of my rx is broken accidentally although it's not signal pin but it's important for me to use servo
       Can anybody tell me how to fix it¿ ??

Solder new pins.

Yeah I know but I couldn't find the same type of pin

Can you tell me where to can I get those pins or what do we call those type of pins

Post a photo of the Rx.

Yeah, picture would be helpful to understand better, usually they are called "Header Pins", the row configuration & type will depend on what you have on your receiver (usually 3 row-90 deg. or straight orientation)- noticed these available on LHS some time back.

Replacement needs some moderate soldering skills.

Thanks

It's middle pin of 1St channel which is +ve pin

It would be easy to identify your problem if you post the picture of the receiver with broken pin and also what receiver you are using.
Since you are saying middle pin I think it is power pin so you can use power pin from other channel since all the power pins are connected in parallel in most of the receivers.

Please read my post from start till end you'll know my problem in detail

Quote from: HANZAla PATEL on February 10, 2019, 11:02:31 AM
Can you tell me where to can I get those pins or what do we call those type of pins

Without knowing which Rx is it, or without a picture, how can we help.
Buy some header pins and solder........!
         OR
Buy another Rx......!

I had problem in uploading pic cause I work In workshop and it's away from my home

I'll upload it later

https://robu.in/product/2-54mm-pitch-40-pin-male-double-row-2x20-pin-header-strip-breakable-2pcs/

Thats not gonna work you'll only understand if I send you pic

If its the +ve pin, you can use the +ve form any other open channel on the Rx...and leave the signal wire in the 1st Channel.

You can also use a BEC for that particular channel.

These options are if you dont wanna get into the hassle of soldering.
I personally would not be able to solder on an Rx, I have elephant fingers I think when it comes to soldering.

Here you go

Easy to fix if you know how to solder properly. You just need to order something similar from a lhs and replace. https://m.banggood.in/2_54mm-3x40P-Male-Pins-Three-Row-Right-Angle-Pin-Header-p-972983.html?utm_source=google&utm_medium=cpc_ods&utm_content=ysq&utm_campaign=all-sds-maxconv&gclid=Cj0KCQiAnY_jBRDdARIsAIEqpJ03n-Hq1PeOwSLN6EUZvdW6IZh1vPmXIKzueh3LPnGTBNNbxrWATzwaAkxREALw_wcB

I have seen such a pin in a shop selling electric items in Satara.

Thanks