Quadcopter moves to the left and spins around on take off

[adithyabiji98]

Can you suggest a suitable solution to this problem??. We are using a kk 2.1.5 flight controller board and flysky transmitter. When the quadcopter is switched on it flies towards the left and spins around during its flight. Plz help!!!

[shirsa2001]

First check if the X config has been chosen properly on the board.
If that is right... rotate the kk2 by 180 degree (and reinstalls pins accordingly).
Now the arms creating problem is on the other side... so the problem should move to the other side... that is left to right. If so it's the esc / motor issue. If the problem is still on the left side ... it's with the board config.

Make sure the esc s are properly calibrated and the screws are not touching the coil in the motors.

[adithyabiji98]

Sir we will look into it and let u know. Meanwhile here is a video footage of what happened

https://cs24.clideo.com/p/hZJN7Pm1TddtKTtJIwBMNQ/8890e0a993227d4ab8297fc46038f33f/trim050400eb-9a8d-4b52-8883-4a380881f039-by4n9mjmmov.compressed.mov