Activities of RC enthusiasts at Shillong

Started by sundaram, January 29, 2012, 11:26:28 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rcpilotacro

no, you can very well take out the wing, for easy star -I it is even easier, there are no servos to attach, wing interlock like a glove. dont talk about my ES wing :giggle: it needs to be glued, very much ;)
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

zonuna

 ;D but the easy star my friend got from RCbazaar needs to have ailerons, the main wing does not have an options for any kind of Screw to tighten it.

rcpilotacro

#77
Quote from: zonuna on August 22, 2012, 09:48:48 PM
the easy star my friend got from RCbazaar

That is not an easy star, it is Sky Surfer, though they look, feel, weigh the same one is an other Lamborghini and the ambassador (I mean is easy star is par execellence). Even that one interlocks, but i believe it comes off in flight, ( i have bought four of them, none have come out in flight) you can Velcro both the wings by sticking male and female Velcro on either side of the wing and as you push it in it sticks together, many such methods are available
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram

Quote from: rcpilotacro on August 22, 2012, 10:03:34 PM
you can Velcro both the wings by sticking male and female Velcro on either side of the wing and as you push it in it sticks together

Thats exactly i follow with my ES likes. My eagle wing has bigger wing span and cannot come in my car fitted, it occupies full rear seat that too kept at an angle. it cannot come in trunk. when I have company I have to remove the wings to keep in trunk.

zonuna

opps, why am I always addressing as ES ... ok Sky Surfer, Velcro ?? I hope the velcro is strong enough to hold the wings, never tried that with the wings.
BTW rcpilotacro my quad from RCD has arrived today, where can I download an instructions and software for it.
I think I`ll be needing lot of your help  ;D  :headscratch:

rcpilotacro

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

Flew in Smit Valley, sandy and I pics follows
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

#82
Motivated by Sam's Yak, took my yak out of hibernation, good to fly foamies once in a while. here are some pics clicked by vineet.

This one has Hoffman Magnetics Super Sport motor, one good motor, ample thrust, slightly expensive motors though, these Hoffman Magnetics
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram


rcpilotacro

some by her...
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

some fun with katana
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

raja_mastana

wow, multi blade chopper! looks like a 4 blade one

I am planning on building one myself. Can we use a normal 2 blade tail rotor with a 4 blade main rotor? I am thinking there will not be enough tail authority because of the low RPM. I could not find a multi blade tail at HK
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

rcpilotacro

Quote from: raja_mastana on January 25, 2013, 04:35:52 PM
wow, multi blade chopper! looks like a 4 blade one

I am planning on building one myself.

it will be very expensive to do that, :giggle: now that is the power of 2d view of the 3d world
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

raja_mastana

ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

rcpilotacro

Did some FPV Flying, some good videos to follow
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

Went to sacred forest today, flew Vineet's MiG 29 and Nitro Yellow Bird, and some combat and formation flying. here are some shots
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram


rcpilotacro

neat vid by param, I wonder how you blindly manoeuvred it around the tree ???
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram

Param always shoots very nice videos, that was even when he was much younger he was my reliable cameraman. Only problem is that he chatters a lot while shooting it. You should hear some of his comments. Most of it I always delete.

It was never blind around trees. I had taken a few step ahead to keep it at sight, it was only param who was behind at the blind spot for a fraction of seconds.

punty

No offense to anyone.. Sundaram sir the chatter's gives the video another dimension, a funny and innocent one.  :)
Specially " KYA SAHI HAI" at the end :) great video

sundaram


rcpilotacro

Quote from: zonuna on August 22, 2012, 09:30:51 PM
How do you transport or store an "Easy star" ..I believe the main wing has to be Glued/fixed on the fuse.

No Zonuna, it doesn't have to be, it is removable. (Sorry, i saw the question now, somehow missed it)
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

Back to basics

after flying 3D for so long continuously, realized my basic flying had taken a back seat. today was pattern aeros, Circuit & Landing, for 3 hrs. Satisfied..

PS
Had a an Aileron servo failure, the instance it failed my Frsky Telemtry went crazy sounding an alarm, landed changed the servo and went again. Saved by the Bell ;D
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

That's one satisfied man, after back to back 12 Sorties
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

Losthorizonmba

 Whoever's in Shillong, please PM me. I have my late '70s and 1980's-vintage analog (jittery) Futaba RC gear in Nongrim Hills gathering dust. Need them to fly. The Tx is rock solid with appropriate crystals. Any Rx works, even the ChiCom ones. Posted elsewhere...
I fly because it releases my mind from the tyranny of petty things. ~Antoine de Saint-Exupery