Flying sessions in bhubaneshwar

Started by shauviks, March 12, 2012, 07:56:16 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

shauviks

Are flying session held in bhubaneshwar regularly. if so plz mention the day and the probable timing ...Since i am new to  this i have no idea about it ...

Shauvik
+91-8093863974
#Bring it on flyer

gurudattapanda

Hi,
Do not know about bbsr, but yes I fly at Berhampur and if you are interested we can meet at any location. I am also new to this hobby  and have some foam flyers home made only.
Failures give idea in how many method we can fail, leading the way to success.

ashutosh singla

#2
hi guru this is ashutosh frm bhubneshwar interestd in rc flyin hobby, pusuing btech mechanical, hv made sm gliders in past

shauviks

hi i am shauvik from bbsr. pursuing btec cse and m into tis hobby
We can meet sometime btw my number is 8093863974
+91-8093863974
#Bring it on flyer

sultan alam

Hello everybody,
I am sultan from Bhubaneswar,Odisha.Glad to know that somany rc lovers are here.
let's arrange a flying sessions in BBSR if u guys are intrested.
And also m going to open a Online Rc store in BBSR too will help to create new flyer.

Best Regards.

shauviks

@sultan bhaiaya Yeah why not? and we also have the place to fly them..
+91-8093863974
#Bring it on flyer

sultan alam


shauviks

+91-8093863974
#Bring it on flyer

KALYANPRODHAN

Nice to see, a CLUB is forming.
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

ashutosh singla

my first day in flyin sessions today. nice to see cessana

gurudattapanda

@Sulatn Bhai-Me too interested, please let me know in advance as I am 4 hours away from BBSR!! And I am eagerly waiting for your RC shop at BBSR!!

Hope we can form a Club also and make regular flying at BBSR too!! Anyway I am flying at Berhampur on every last sunday, if interested can join me!!
Failures give idea in how many method we can fail, leading the way to success.

shauviks

@gurudutt wen to fly then  wen can u cum here ????
+91-8093863974
#Bring it on flyer

gurudattapanda

Any day you are interested? lets chat!! R u on gmail or facebook? search for gurudattapanda or gurudattabam   (at the rate) gmail  dot com
Failures give idea in how many method we can fail, leading the way to success.

sultan alam

Quote from: gurudattapanda on April 23, 2012, 12:26:21 PM
@Sulatn Bhai-Me too interested, please let me know in advance as I am 4 hours away from BBSR!! And I am eagerly waiting for your RC shop at BBSR!!



Ofcourse i shall tell u first.

gurudattapanda

My Foam Plane, under construction for CG balance.
Failures give idea in how many method we can fail, leading the way to success.

gurudattapanda

Lacking of Fund for Motor??
Use this BLDC Motor!!
Just get some old and defective ComputerHard Drives/ CD Drives from any computer maintenance shop, normally they give you free, if they ask also give them maximum Rs50.
Now disassemble it carefully, take out the motor and its screws also.
The tough part:
See where are the three points which is connected to the Motor Winding in case of CD/DVD drive motor.
In case of Hard drive motor normally 3 connections are there, if 4, one of them is ground, so measure the resistance between any two points one by one, the lowest resistance between the Ground and any point is lowest with compared to any other two points.
Now omit the Ground or common point, connect(Solder some wires to terminal first) the rest three points to ESC!! Power it up and raise the throttle!! see the speed!! Use it for Ducted Fan Jet Engine or Propeller engine your wish!!
I have run them many times, but never used for planes or Heli, so use at own risk!! Use a greater value ESC (30Amp)!!
Failures give idea in how many method we can fail, leading the way to success.

shauviks

@gurudutt gud job congo keep it up ope to see u soon in our club with tis model flying high
+91-8093863974
#Bring it on flyer

sultan alam

Good job man.
We the BBSR rc club members are always with u.

manojswizera

I have tried These motors Gurudatta. ( Floppy drive, CD drive & Hard disk ). The best one with max power i felt is CD drive one.It can be easily wind and Power is also Great, While rewinding of Hard drive and floppy drive is difficult. You need very fine wire as there is very small space between the Wrings on stator and bell of the motor.
CD drive motors can be use on small fomies    ;)
Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.

gurudattapanda

@Sultan and Shauvick: Thanks for the support!! Sorry its a almost 34 Inch foamy, so taking it by public transport may not be safe, anyway I will try to post some videos once it flies with stability.
@Swizera: I am not going to rewind it, I want to try this for 64 mm Ducted Fan jet engine, Dont know about its power... Any idea? And do not worry about the thin wires, I soldered them with a good pointed soldering machine!!
Failures give idea in how many method we can fail, leading the way to success.

gurudattapanda

Failures give idea in how many method we can fail, leading the way to success.

shauviks

@bbsr rc folks rc flying session 2morrow at kiit stadium from 630 am onwards
+91-8093863974
#Bring it on flyer

sidcruise

Hi. Am planning to get into this Hobby. Are you guys still flying nowadays. Need some training before I fly myself.

shauviks

@sidcruise sorry for late reply yeah we still fly hope to seee u soon
my number 8093863974 call me
+91-8093863974
#Bring it on flyer

gurudattapanda

Sorry to all Odisha folks!! I got job at Rail Vikash Nigam Limited and have to leave Berhampur, still I am available on my mail id and PM!!
All the best!!
Sky is not the limit for those who desire to fly!!
Failures give idea in how many method we can fail, leading the way to success.