Dear Sir,
as being newbie need help on following,

created an RC plane

wing length 900mm
wing width 110mm
plane length 470mm
plane frame weight 70 gms
prop : 6045

electronic:
motor : 2204/1400KV 23gms
esc : 10A, 8gms
servo : 9G, 4pcs, 36gms
Rx : iA6b: 6.4gms
battery : 2s Lipo : 90gms

total weight : 233gms

will it fly?
will the ESC sustain

can I use high powered Panasonic NCR18650B battery in 2S form (2C discharge-approx 6amp)

no landing gear

Hello Satyakam,

As per the specs it seems to be a very light plane & it is capable of flying with the described power setup.

First show us the pic of your plane  as with all the stuff used weight could easily go to 500-600 Grms.

Using 18650 is not recommended as it will spoil the AUW . Better to bet on a 500 Grm 2S Lipo.  

All the best.
regds
Saurabh

plane getting assembled

my previous plane assembled carry 450gms AUW,

wing length 730mm
wing width : 100mm
length : 500mm

electronics :
motor : 2212/1400KV
ESC 30Amps
Servo 9G: 4 units
3S lipo