First Heli crash in 5 years of 3D flying

Started by Harveer, August 28, 2012, 02:19:40 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Harveer

My first heli crash in 5 yrs of heli 3d flying, want to rise the bar lower for inverted, LOL. Try to trim the 2" grass to 1" and the grass dint like me to do it and even the winds dint support, 10 knots, gusting to 14-15 knots.

Harveer.

Hellyflyer

That's really a nice trim you got in the second pic {:)}
Helis and Quads ROCK !!

rcpilotacro

That is neater than any grass cutting machine there ! i understand ! when you push the limit, there is urge to go that extra inch,

My incident
on my rolling harrier i touched wings continually for three rolls, emboldened i tried again and lo and behold !! wing joiner broke, wing tips were gone and fin was damaged of my addiction, a low pull out of my blender, GP Reactor mount and firewall gone. But then there is a thrill in there too ;D
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

Harveer


ujjwaana

Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother

vinay

Remote controlled lawn mover  ;D that does the job only when its inverted.

second_chance


ebinmoothedam

dreamer.

Harveer

Quote from: second_chance on August 28, 2012, 09:20:10 PM
I know exactly how it feels !

Its nt feels too bad chand ji  ;) Now every body knows tht who got the *alls

Heli was ready for a test flight 2 days bk but dont have the DFC rotor grip arm bolts.

If any bodyzz ordering stuff from align store (Infinite or Helipross), plz add Item No:H60245 M3 socket

collar screw for me & and give me your account details & amount. I'll transfer the amount.

Regards,
Harveer.

raja_mastana

Only Align M3s will work?
There is a hardware store here who can sells M3 25mm for 10.00 Rs
ALIGN 450 PRO DFC 6S Belt Driven | Polaris BEC | Nano-Tech 6S 1300mAH | Robird G31 | 325D Pro | TGY-306G HV | KST 515MG | K-Force 40A | NTM Rotor Drive 1700kv

Multiplex Easy Star 2 | Multiplex Mentor | Nissan 350Z Endless Tamiya TT-01D

Harveer

It wont work dear, they are specifically built for DFC with high carbon.

Harveer