Please add whatever comes your way on how to 3D (Fixed Wing, i.e. aeroplanes only, for helis we could have another), as a central repository, your own video? better. Model Airplane news is good start point.


Happy 3Ding

Staring with a Hovering Square loop

Read this

http://www.modelairplanenews.com/blog/2013/09/23/mastering-the-hovering-square-loop/


Watch This (since, there aren't many howto's of a Hovering Square Loop, decided to make one on my Real Flight 6.5 )

www.youtube.com/audio?v=X0bjndCjgdE&o=U

an old post (circa 2009) by Anwar bhai

http://www.rcindia.org/rc-maneuvers-and-skills/how-to-do-walls-tumbles-and-waterfalls/

Snap Rolls (90, 180,720, & LS Flicks), Rolling Harrier, Hover, Torque roll and Reverse Hover, High Alpha Rolling Harrier. All on the latest Real Flight 6.5

www.youtube.com/watch?v=WBLFgb1BAzo&feature=youtu.be

fantastic tutorials .. i m uploading some of 3d tutorials too .. i m sure you will like them.. our all time favorite maneuvers are performed in that series.. i have trial version of fraps .. so each video is only 30secs.. but very informative , if scrutinized properly. 

Nice !!!!!! Keep it coming 

That's superb Shadman !! keep it coming, let's keep adding, our very own home grown

Quote from: shadman_alam on September 29, 2013, 09:36:10 PM
i have trial version of fraps .. so each video is only 30secs..

try camtasia, i could share it with you, if you cant find it at ...

ok let me see if can i get it .. lets do the videos on request.. on public demand.. i really doubt these maneuvers can be easily digested by everyone.. 

Quote from: shadman_alam on September 29, 2013, 10:38:39 PM
really doubt these maneuvers can be easily digested by everyone.. 

indeed.....  awesome work there gusty sir and shadman..!!!

  Folks, I came across the following video, rather interesting. May be, some of the senior guys would have already done that but never the less.....



Some of the comments below the video were funny and interesting .

I will say in words how to torque roll. 1: First take off the plane in 60% throttle and 100% elevator angle of attack. 2: When the plane reaches full straight up, Get throttle below stall speed (of about below 50% throttle). Every plane has different stall speed, it depends on the weight of the plane and the power of the motor. You can find the stall speed by holding the plane upright and find the speed below the plane lifts. okay . 3: After getting the plane upright. You have to use ailrons more than rudder or elevator.  First rotate to the opposite side where the plane slants vertically. And After rotating the plane use rudder to correct the plane.  At that time the plane will slant horizontally then use slight movements of elevator to correct. After that do the opposite way. This is how we can do the best torque roll hovering without moving the plane from its position. If you work very hard, you can fly the plane without much corrections and do other (or invent new ) tricks. ♥ □ have a nice flight !

Here's my micro SU-26 doing "snap" outside loops and inverted flying.  It's made for partial 3D flying since it has very limited hover ability.