General Topics => RC Outlets and Resellers => Topic started by: yashodhanp on November 24, 2013, 03:57:35 PM
Title: Laser Cut Kits
Post by: yashodhanp on November 24, 2013, 03:57:35 PM
Hey guys, i was planning getting quite a few kits for different RC models laser cut(balsa) .I was wondering if anyone here, would be interested in buying them.. :headscratch:
I will PM people interested with the list of planes that i will be getting cut.
Most parts of each of the kits can be constructed without plans, as i have made notches on the parts for easy assembly (the kits can be slotted together in most of the places) :). Only a few parts will need plans since they would be impossible to notch :)
Will post the prices soon, if there is a good demand, and once my balsa comes in stock.
(Covering and Electronics will have to be purchased separately ONLY the wood and/ Carbon fiber and requisite plans shall be included)
Regards Yashodhan Pasari ()
Title: Re: Laser Cut Kits
Post by: iwincar on November 24, 2013, 04:39:18 PM
Gud one...why don't you suggest the electronic equipment list with each model...
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 24, 2013, 04:48:14 PM
Sure i will. All that will be in a small instruction sheet attached with the model. :)
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 24, 2013, 09:24:29 PM
The models that i will be getting cut are:
Trainers and Aerobatic: 1. 25 Size High Wing Trainer 2. 15 Size High Wing Trainer 3. 25 Size Low Wing Trainer (Available with Constant Chord or Tapered Wing) 4. Ugly Stick 48" 5. Cap 232 6. Katana 7: 25 Size Telemaster
Park Flyers: 1. 36" High Wing Parkflyer (Ideal for Beginner) 2. 36" Telemaster 3. 3D FunFly (370 size, Carbon & Balsa Construction) 4. Mini Ugly Stick 5. 3D Mini (Resembles an AmpMaster Jr. But has Constant Chord Wing and 36" Span) 6. MiniCap
Gliders: 1. 50" Wood & Carbon Glider (3 Channel)
(The Kits will contain the Pre-Cut Wood Pieces, Carbon Fiber (Where Applicable), Instruction Manuals, Wheels and Engine Mounts(Where Applicable) and Plans (Where applicable)) Covering will NOT be provided in any kit.
Short Kits can also be made available. (Will include all the Wood, Carbon Fiber, Instructions and Plans, But Wheels, Landing Gear, Control Rods and other accessories will need to be purchased separately.)
These will be available once i start taking orders and if a few people are interested in buying them. The list may increase further if there is a greater demand. Prices will come very soon. You may Reserve some models if you wish to.
Regards
Title: Laser Cut Kits
Post by: utkarshg13 on November 24, 2013, 10:52:35 PM
(:|~ (:|~ (:|~Great to hear... very nice offer. Interested in Katana and the Glider. Please post the prices sir. :hatsoff:
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 24, 2013, 10:56:48 PM
hey, can you pls. give me a few days? so that i get all my materials etc. only then can i get back to you with my prices.
Regards Yashodhan
Title: Re: Laser Cut Kits
Post by: sundaram on November 25, 2013, 01:33:27 AM
interested. please give more details on dimension and size of each model.
Title: Re: Laser Cut Kits
Post by: FlyingBrick on November 25, 2013, 04:47:56 AM
Yashodhanp, you are raising the hopes of many here, I hope you will deliver on your promises too. I have a few of the models you mentioned in my mind awaiting more details from you here.
Needless to say many have come here before, claiming a lot of things which they could not /would not deliver later with reasons within or beyond their reach and means. This hobby is very near and dear to all of us, we will be happy if you can help it grow.
If I may suggest in a very friendly way : be very clear & open from this day on your plans going ahead, you may pick a few items from your long list (use voting to know which ones are more popular here) deliver these, build up quality and trust and go ahead and expand as you wish. Let me also say that many here are just watching you with keen interest but have not said so publicly having seen such promises turn to a knot before.
Wish you all the best :thumbsup:
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 25, 2013, 06:36:02 AM
The Dimesions and sizes are as follows:
Trainers and Aerobatic: 1. 25 Size High Wing Trainer Wingspan: 50" Length: 40" Motor: 400W Engine: .25 cu
2. 15 Size High Wing Trainer Wingspan: 48" Length: 37" Motor: 300W Engine: .15 cu
3. 25 Size Low Wing Trainer (Available with Constant Chord or Tapered Wing) Wingspan: 48" Length: 37" Motor: 400W Engine: .25 cu
Gliders: 1. 50" Wood & Carbon Glider (3 Channel) Wingspan: 50.5" Length: 35" Motor: 400 Size Outrunner Channels: 3 Channels (V-Tail and V Tail can be made Detachable)
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 25, 2013, 07:49:16 AM
Quote from: FlyingBrick on November 25, 2013, 04:47:56 AM Yashodhanp, you are raising the hopes of many here, I hope you will deliver on your promises too. I have a few of the models you mentioned in my mind awaiting more details from you here.
hey, i am totally with you on your concern. :) i spent quite a lot of time cadding out all the plans. And i sure will deliver on all my promises :)
As of now i will work small scale, but if demand goes up, then i will go ahead with it.
Regards
Title: Re: Laser Cut Kits
Post by: iwincar on November 25, 2013, 10:15:29 AM
Importantly if you could post final assembled product snap and description would be of great help
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 25, 2013, 10:31:13 AM
Hello, i am sorry : ( .. unless more people show interest i won't be getting these cut(i will only cut one at a time for myself). However most of these aircraft are existing designs that i have cadded. So if you want i can post those pics from online. They will look exactly the same or close.
Regards.
Title: Re: Laser Cut Kits
Post by: sundaram on November 25, 2013, 10:47:59 AM
Similar pictures for reference & rough idea welcome. Interested in CAP 232, Ugly stick 48", 3D fun fly and mini ugly stick.
Title: Re: Laser Cut Kits
Post by: VC on November 25, 2013, 11:08:26 AM
PM sent. Pl respond.
Title: Re: Laser Cut Kits
Post by: punty on November 25, 2013, 11:14:35 AM
Given the price factor is within my budget. I too would be looking for to buy either of the 15 Size High Wing Trainer, 36" High Wing Parkflyer
Regards Punty
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 25, 2013, 11:38:07 AM
Give me time till tonight. I shall post the pictures and estimate prices :)
Title: Re: Laser Cut Kits
Post by: yashodhanp on November 25, 2013, 12:27:44 PM
Here are the Reference Pics:
All the kits will yield designs similar to these'
15 & 25 High Winger (Design will be a bit different for the 25 size) (http://s6.postimg.org/osrdry5i9/15_High_Winger.jpg)
25 Low Winger (Will be supplied without canopy bubble(Not Important)