Hello, As suggested by VC , instead of making pre-made kits, i will offer laser cutting service to any modeler wanting some plans cut out. The plans can be in any Format. (NO HARD COPIES for now)

Here's how it will work

1. You E-Mail the plans you want cut in any format, and also inform me of the scale you want it cut

2. I will send you an estimate quote for the designing charges. (Will Vary depending on complexity.)

3. Once you approve it, then i will Re-Draw the Plan in Corel Draw, and scale it, and send it to you for approval.

4. Once approved, then I will Give you a quote for laser cutting and wood costs.

5. Once Approved, i will get it cut and ship it over to you.


@VC ji.. a big Thank you for suggesting this idea to me. 

Regards

All the best!

Thank you

 

can you post a few rough estimates? I have some stuff to get cut... thanks!

Sent from a potato using a lamp - now mashed

@aniket it all depends on the plans. The designing can be as low as 150 can can go upto 750-800 for large plans/ or plans that are extremely smudged.

As for cutting that I will be able to give you estimate only after seeing the plan.

Send the plans to me on

Regards

Please let me have an estimate for the two glider plans (Gnome and Inchworm) that I had sent to you yesterday. You may use Japonica extensively.

Sent the estimate. Check PM

how do these look like, dimensions, RC non RC ?

Rc/non rc depends on what plans you want to get laser cut.

I meant the gliders posted above..

Those gliders are towline gliders.

One is a 34" Span(Gnome), the other is a 64" Span(Inchworm)

Hey guys, I got some Micro Quad Frames Laser Cut (10" MtM)(Cut in Plywood)

Pics are posted below.

Details:

1. The One Piece Quad



Span: 10" MtM (28mm Motors eg.: Park 250)
Prop Size: 5"
Predrilled Holes for KK Multicopter Boards
Ideal for Park Flying

Price: Rs. 200 + Shipping via EMS (Bare Frame Only. Motor Holes will not be drilled as shown so that you can drill it according to your motor. Screws can be provided at extra cost)

2. The FPV Micro quad



Span: 12" MtM(28mm Motors ONLY)
Prop Size: 5-6"
32mm CCD Mount Included
Ideal for FPV

Predrilled holes for 30mm/45mm Boards available

Can be assembled using Epoxy  

Price: Rs. 250 + Shipping via EMS (Bare Frame Only. Motor Holes will not be drilled as shown so that you can drill it according to your motor. Screws can be provided at extra cost)

Good stuff for smaller Quad builders! I definitely would be interested in something that is around 500 mm as I want to change the frame of my existing Quad.

hi yashodhan please check mail

Bumpity bump....Anyone else.

Materials that can be cut are HDF and Balsa

Hello Yashodan

Could you give me an estimate for Inchworm (kit)

I would like to adapt it for electric flight

Thanks

Pls. Check PM

doing a great job, i will take your fpv quad aswell ask you to cut some frames.
Do you offer glass fiber cutting?
do you have your own cnc?

No only wood and acrylic and stuff.

Some of the custom cutting done by me:


2. Tricopter Frame for forum member SideWinder

all 2.5mm HDF?

Yes

ok sending you the plans today