Is Dx6i available with rotor sports? R they available on saturdays?

Rotor orders on demand, so only they can confirm if they have it. Try calling them.

For the DX6i, Indian Hobbies is your best option.

Traxxas India personally cater to the Indian market and have been adding new dealers.

Currently Tritech Hobbies in Mumbai, S.M Distribution in Chandigarh.

Coming soon: Dealers in the following cities:
Hyderabad.
Udaipur Rajasthan.
Ludhiana.

Dealership enquiries for the following regions are welcome:

Chennai
Bangalore.

RCSKYHOBBY is not an official dealer of Traxxas India.

I found Indian Hobby center, Kolkata is toooo much expensive where the others are available at relatively lowest price for the starting model(Cheaper) and also cheaper for same model.

At mid 2004, during starting of my first Carrier, as user of RC Car & to gift, (Of course Full Function) I found Rs 140/- at Delhi Sadar bazar (Without Bargain), Rs 200/- at Mehta Building(Also without Bargain but old stock as next week, cost found Rs.160/- and I purchase) Kolkata Ground Floor Shops and at Indian Hobby Center , Rs.350/-(Appx as I cannot perfect remember but cost at first request in person) for the same 27Hz, Tx2/Rx2 based system, Car-6 Volt(4x1.5) + Remote-3Volt(2x1.5V). Later I just purchased Plastic prop from IHC for rubber powered model aeroplane.

The cheapest shop is also in mehta building or in bagri market or in beloon gali, but the area is same. I got informed that some importers sells on the upper floors, but in quantity and all are ready or almost ready.

I just stuck to one small shop in mehta building for RC Cars for gifts for budget. In that shop, the 6" indoor battery powered Heli now sells at Rs. 700/-, Same in New Market Footpath Rs.1500/-.

As, I have not sufficient time right now, I just share my experience of marketting. Of course, RC kit, Servos and other component, for the aeromodelling are found exclusively in Hobby Center by me though other places may available .

In mid 2006, I found & surprised that one of the best Aeromodelling Engine is exported from Howrah (Manufacturing unit Near Foreshoor Road), but I cannot trace and later for several time change/format of HDD, the address lost.

So, I request to add Mehta Building as one of location of RC Shops in Kolkata.

My Shop Direction (No Name to avoid ad just go physically, I also dont know name)
==============================================================
Enter from Canning Street. Enter Ezra Street (i. e. right turn & stop). Left hand side you find mehta building. Enter first Galli. The small shop at right which you might see wholesell customers just orders or head loading of gift items (Thumb rule congested shops are have attractive rate). This is not RC Shop only but keeps all attractive gift toys. Shop is 4'-5' wide only. in opposite you can see much larger shop with RC but higher cost. Of course, there is no warranty and I found all working which purchased by me.

Welcome to the forum Kalyan - it seems like you have the right spirit. Just one doubt - are you a modeller or a seller/dealer?  I regret my inability to fully understand what you are trying to say. or convey to the forum. 

Nevertheless, I miss Kolkata today evermore, as visions of Canning St, Ezra St and Mehta Building are popping up in front of my eyes. A flashback of days gone by when I was as young and impetuous as you are today.
Cheers!

VC

Anwar,
CARAX
http://www.carax.in
is this store really deals in R/C parts and equipment?

Sandeep

I thought they sold nitro RC cars.  At least they used to !

http://www.team-bhp.com/forum/indian-car-dealerships/13153-pune-city-accessories-workshops-paint-shops-5.html

Quote from: anwar on July 29, 2010, 06:16:48 PM
I thought they sold nitro RC cars.  At least they used to !

http://www.team-bhp.com/forum/indian-car-dealerships/13153-pune-city-accessories-workshops-paint-shops-5.html

I guess they used to sell TT cars or they had display of models at one time. May be they stopped because selling and servicing RC cars is not as easy as car accessories......

If anyone can confirm, I will remove them from the list.

Dear VC,

I am not a seller, or Dealer. I just purchase the RC Cars in quantity just to gift them (Of course, I have just checked the circuits reverse engineered, before gifting, for knowledge and warrenty has no value to me as I know how to make working if defective) at different occasion to children to increase the craze & enjoyment of RC so that their technical knowledge increase while playing.

I just surprise now-a-days, parents purchase mobile cellphone cost as high as 9000 - 15000/- but never purchase a RC RTF which require little skill & increase concentration. HAM & Aero-modelling is just disappearing.

In my locality, for the tight budget, I share 3d kite plans to explain 3d modeling, solid geometry & simple aerodynamics in use. I just use carrybag, bamboo-stripes, cellotape, Polystic White glue, Soldering Iron in combination of SteelRule & Glass.

Truely speaking I personally consider, kiting => 3d kiting => Control Line Airplane => RC Gliders => RC Plane/Heli may be arranged for self made hobby in cost axis and all are related.

Another true fact is that purchasing separate RC Plane spair is much higher than purchasing a ready item and modifying them.

Actually I hate the high business profit to using those learner, who may discontinue for cost.

Belief me, I have made Props made with Brown Paper(Thick), Polystic Gum, Some Hand made tools (Wooden Dice, Adjusting balance made by me) and of course scissor, Knife & made cheap prop replacement (for rubber powered Gliders made from Jute-Stick(Dowel), Thermocol Wings, covered with kite paper/Carrybag with thin polystic glue. Of course they are not last long but serves another perpose. I get informed that another model is awaiting to made by me.

Where hobby center sells a prop minimum 15/- to 20/- {Goog Prof. prop 30/- -150/- & similar to any international cost} I made at least 3 complete plane in that budget. Dont think that I made this for budget only. I belief that every problems till it fly perfectly after adjustment, the knowledge hungry view of the kids must attract then to this hobby, who also learn with my every mistake (unwilling or willing).

I am actually culture my hobby isolated from other association. I remember that, in my second year of diploma, gone to visit state science fair in BITM with friends and informed that the aeromodelling class held at Gobordanga (far away from Kolkata City, merely a suberban township perhaps) insted of kolkata (in 1996). In 1997 I found 2 Bengal & 4 bengal Air Sq. NCC Unit inside Jadavpur University teaches the same. Though I completed Graduation & Masters from JU but for continuing service simultaniously & Other problem I cannot join and I dont know that if they teaches outside NCC or give option to join in 30+ Years of age.

Please excuse me, as cost is not issue to others but to me, as I born & brought up with very low resource, and know how much price is valuable to a kid if not supported by the guardian.

Hi Kalayan

Very nice and emotive post.

I shall be in Kolkata from the 1st August to 7th August - I live
in Salt Lake.

If you like , pls get in touch with me and let me know what
you need.

I'll try and get it to you from Assam - no strings attached.

If I can't then I'll send it when I get back.

Quote from: KALYANPRODHAN on July 30, 2010, 01:35:03 AM
HAM & Aero-modelling is just disappearing.

off-course not. Its Ever flourishing.

Quoteoff-course not. Its Ever flourishing.

Though out of topic but I cannot restrict me to inform that I would be very happy if we together upheld this hobby more informative rather business.

Please add this to the list under bangalore:

Indian model makers
ISRO Satellite center,
Airport road

08025084480
9845710448

Was at isro today. Was given a detailed tour of the entire facility at airport road and marathalli. The place is just awesome!! Got a close view of the next 12 satellites which will be launched by India (all in various stages of construction). And when i got out i discovered this store in the campus. The manager and his dad were so helpful. They spent almost an hour explaining about the diff models, showed me videos of their flight in chennai. His dad has been flying for about 5 decades. I have requested him to register on RCINDIA so that all of us can gain from his experience.

Added to the list.  BTW, any pictures of their products ?  If you have any, please post it in a new thread.

Nope. I do nat have any pictures. Just spoke to them, bought a chuck glider and took their card.

Hi Anwar,
Please correct the email id of Mr. Vijay from Indan Model makers
correct email id is :
Email:

Oh i made a mistake.! Yes the mail id is to be changed. sorry.

Dear Anwar,
I don't know if you have noticed, but Bombay RC does not open up man!
It used to say that the domain has expired before, but now, theres nothing coming up, it just opens up links to some other websites.
Thought you should know!

Dorwin

Please see the response here  from BRC :

http://www.rcindia.org/rc-outlets-and-resellers/bombayrc-shut-down/msg25307/#msg25307

Thank you!

Dear Everyone,

http://www.rctimer.com

Hello RC timer/ Nina!
How reliable is China post?
I have a cart of some things I need, but am just waiting for a reply on the reliability of China post!

Dorwin

Hi all I am from Hyderabad I am planning to start a Rc Outlet.So pls any Ideas and leads regarding the wholesalers. Reply me to

Quote from: controlflyer on August 17, 2010, 08:44:25 PM
How reliable is China post?
I have a cart of some things I need, but am just waiting for a reply on the reliability of China post!

We have received multiple RCGF gas engines directly from China, no issues at all. 

Unrelated to RC, we have received other items also.