Augustine from Kerala and my Hangar

Started by rcpilotacro, April 16, 2011, 05:46:48 PM

Previous topic - Next topic

0 Members and 14 Guests are viewing this topic.

anwar

Unless you put lights or scale articles like retracts (or cameras etc), 7 channel is the most any heli would need (including engine governor) :)
Hangar : Please see my introduction.
RC India forum and me : About this forum.

rcpilotacro

#101
Looking at kit for my raptor 90,one gyro and my 7C has no Channel to spare, how do i use the retracts ???, will post picture for guidance. 14 MZ Second hand sounded a good choice
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

anwar

How many channels do you need extra for this ?  Normally the original Raptor (swash type H-1 in Futaba land) would only need 5 channels, including remote gyro gain.  So you will have 2 extra channels on a 7 channel radio.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

rcpilotacro

Will post a pic, i put voltage spy in one , any other way of putting voltage spy  ?
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

anwar

Y cable on pretty much any channel ? I am not sure exactly which device you are calling the "voltage spy", but if it just needs to read the voltage from 2 of the 3 pins, a Y cable should work.  Using the Y cable also frees up one channel's pins, if it is used exclusively to feed in receiver power.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

prateek13

Quote from: augustinev on May 10, 2011, 10:31:22 AM
Added Futaba 14 MZ Tx with 14 Channel 6014 Rx to my Hangar (http://www.futaba-rc.com/systems/futk9400.html) , had to save up for some months to get one. will take some time to integrate into my models.

hey!
congrats!

but ithink you went a bit early for it
check this out

http://www.facebook.com/photo.php?fbid=10150241934240266&set=a.115880795265.128964.95574905265&type=1&ref=nf
Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D

Sreedhar


rcpilotacro

Added Raptor 90 and Scratch built 'White Bird' (Accounts for my hibernation for 3 days). maidened Raptor (That pic taken out of maiden video), will post video soon, yet to maiden White bird.
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram

White bird is a Scratch Built I cannot believe my eyes.  :o  :o  :o

If that is not a typo then Awesome Marvelous is the word  {:)}  {:)}  {:)}  {:)}  {:)}

When are you Opening our own next door Local Tower Hobbies for sale.  ;)  :P

:goodjob: Great Job  :thumbsup:

rcpilotacro

if you watch closely you will see a lot of flaws in the white bird, canopy was not cleanly cut (Half asleep), canopy was fixed, stuck, realised pilot is still outside (Decided to keep him out for a while, went to gr8 length to get a WW II pilot from RCD). Nose job is not very clean, wanted a profile tailplane, settled for flat, i feel fin area is small, so much for white beauty
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram

Oh no Sir I can see no flaws only smooth curves, fine airfoil, straight lines, shining surface and absolute symmetry in the build. To achieve such finer finish in balsa build (with the visible ribs in the wing airfoil under oracover I presume it is balsa) is nothing but good building skill, patience, In short I can only say commendable.  :salute:

VC

There are a lot of thieves in the Northeast who speacialise in stealing aeromodels. Some thieves are based in Guwahati and regularly travel to Shillong to steal models from unsuspecting officers............... >:D

Awesome hangar (If I didn't mention that before) and the White Bird is  :bow:
Growing old is mandatory, growing up is optional!

rcpilotacro

#112
Gave away, Katana 3D to my son, his first Nitro 3D (Is he ready ? i'll know tomorrow, if i end up with a pile of balsa, no , otherwise yes)

Raptor 90 is with OS 90 engine& Futaba GY611 Gyro (You can see the Voltage Spy on its side) and Katana is with ASP 70 4S,
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

Quote from: VC on May 13, 2011, 11:40:25 PM
There are a lot of thieves in the Northeast

add one more to the list ;) come june

PS
That is my Katana on RCD Website
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

bmanoj2

I miss  :( my Katana 46, the same model in your picture. I glued the wings to the body and was the best 3D plane I ever had. I regret giving it away to make space for my First 50 cc Gas. I was using an OS .55 and I still miss the fun I had with it. As the wings were glued together, no assembly at the field was required. ...
"Learn from yesterday, live for today, hope for tomorrow."

rcpilotacro

#115
if you discount the park flier like the park and the acro master, this is the best 3D no doubt about it, except of course cant fly it when the winds are strong, gr8 hover, superb harrier and inverted harrier

PS
My wings are bolt on, so for long distance display this katana in Nitro & Yak 54 in electrical are the best, takes less space, family don't even get to know there is aeroplane in the boot. i using ASP 70 4S, i love the sound of 4s in a 3d
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

Added SAB (Italy) CF Blades to my Hirobo.
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

#117
Here is my Raptor maiden, i am new to helis (About 5-6 hrs of sim time, that's all i have, though flown real helis) that's why nose out, don't giggle at my hover and turn, that's all i can do right now. njoy

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

rcpilotacro

#118
at pick up tail is shivering like anything, can't make out whether is it because over correction of gyro or what ? or is it normal ?
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

anwar

Please refer to the below discussion, as "shivering" is quite ambiguous.

http://www.rcindia.org/helis/tail-wag-and-head-speed-trex-500-fbl/

A shiver is different from a wag, and a horizontal axis wag is different from a vertical axis wag.

If you are referring to the couple of wide wags just before take off in that video, then you can try two things :

1.  Increase your gyro gain until the tail starts to wag aggressively with small range of movement (more like shivering), then back down couple of points.

2.  You may have a throttle to pitch curve mismatch.  Essentially, you are trying to take off before there is enough head speed for the tail blades to gain enough speed/authority.  So try either increasing the throttle curve around hover point, or reducing pitch curve, or a combination of both.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

rcpilotacro

Quote from: anwar on May 23, 2011, 08:56:14 PM

2.  You may have a throttle to pitch curve mismatch.  Essentially, you are trying to take off before there is enough head speed for the tail blades to gain enough speed/authority.  So try either increasing the throttle curve around hover point, or reducing pitch curve, or a combination of both.

for a beginner this may appear Greek and Latin, i am with you fully, yeah that's why so few helis and heli pilots in the field, i think, honestly, it is a a step after your sort of master planes (Fixed wings), the heli. flew the mini titan today, with trnr legs extremely agile and very difficult to fly, gyro adjustments too are very sensitive
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram

#121
Wish you a very Happy Birthday to you sir and an advance very Happy Anniversary to you for tomorrow. Wish you many happy returns of both the days for you.

Good to know that you have your birthday between me and Shilpa, I can never forget the day now. If I had waited for a day or if you had born a day earlier we would have the same Birthday  ;D. For now same sunsign all the three of us  ;)   {:)}

Have a wonderfull day

Sandy

Swapnil


Divyam

Thunder Tiger Phoenix BX
Associated RC18T2/B2 Kit
Walkera 5G4Q3
TechOne Angel
Hiller 450 v2
Futaba 7c 2.4Ghz
Slash 4x4 (sold)

AEROVISHWA

happy birthday sir....!!!

happy landings for the near future..!!
Aerodynamics are for people who can't build engines.
-Enzo Ferrari

https://sites.google.com/site/vishveshkakkeri93/
HAPPY LANDINGS