Hi guys... I have built a wing with undercambered aerofoil...
chord 7 inches
span 37 inches...
any ideas on what to use it for?
Ps
built with coro 3mm

It weighs just above 125 grams
No dihedral

Well try to make fuse and feathers and then stick those to look like a plane and then try flying....

I am asking which type of plane... pusher or tractor...
Low mid or high winger?

One thing I observed on glide testing was that the wing inverts mid flight and falls down...
On using an avispad fuse with this wing... it glides nicely.. is there something wrongs

Decided that this will be a rubber powered one...
Need advice from rubber experts

Damn... I have never seen how a rubber plane looks like.... nothing as big and heavy as this... options left are chuck or fully powered rc

Just struck an idea... I will prepare this model for chuck flying this Sunday  and make it adaptable to take power systems later on after march when I get them...
Is it feasible?

Cg

Yes that must be considered...
For a chuck plave its easy but while converting I will have to be careful

Pusher trainer highwinger first without prop then will add power...
Will try to get it towed by a fello fliers plane and then free flight in circles

Fuse

Wing

another pic of wing

A slow flyer high wing trainer is your best option.  All of my GWS Slow Flyers have thin under cambered wings.  It's impossible for them to go fast without losing stability or without nosing up.