a scrap built hover craft

Started by akash, April 29, 2009, 11:46:09 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages1
User actions

akash

April 29, 2009, 11:46:09 AM
hi all... this a scratch built hover craft did for my school project exhibit. it does not contain any new part, entirely scratch built.

akash

#1
April 29, 2009, 11:57:58 AM
it is built by thermocole sheet, and ad board which we can see in electical posts (got it from there only ;)). 2 motors from a broken remote car. one for lift and another for propulsion. used the same radio and steering mechanism ( dont even have the servo ;D) from the broken remote car. and a piece of cloth from torn car cover for the skirt. simple isn't ;D

rcforall

#2
April 29, 2009, 02:10:48 PM Last Edit: April 29, 2009, 06:20:47 PM by anwar
Akash ,
This is very good. How does it hover, any Video ?  {:)}
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

izmile

#3
April 29, 2009, 04:34:16 PM
Ingenius!!... {:)}
"Anything can fly" - SPADs just prove that!

Rao

#4
April 29, 2009, 09:33:36 PM
SIMPLY GREAT  {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} VIDEO PLEASE {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)} {:)}

akash

#5
April 30, 2009, 09:08:30 AM
thank u very much guys. :) i feel very sorry to say tat i dont have any video now. but i will take one and upload asap.

Pikle6

#6
April 30, 2009, 01:45:38 PM
hi akash great work i used to make boats he same way break open a rc car one motor for propulsion and the whole turning mechanism with rudders attached to wheels to steer the thing
E.V.Subramanian
Yak55|EasyFly Glider 1.9m|Skyfun|Easystar II|Quad Talon V2|Mini Saturn

akash

#7
April 30, 2009, 07:52:03 PM
hi Subramanian
                    took a look at ur website. very nice {:)}

Pikle6

#8
April 30, 2009, 08:21:35 PM
thanks a lot akash next time if you have time drop in a suggestion at the website
E.V.Subramanian
Yak55|EasyFly Glider 1.9m|Skyfun|Easystar II|Quad Talon V2|Mini Saturn

sahilkit

#9
May 04, 2009, 10:16:29 AM
to akash n pikle6

nice hovercraft, please post a video of your hovercraft we would all love to see it  :)

nice test setup u guys have there pikle6, are u guys doing all this by yourself, for where did u source all the parts ?

best

sahil
Today might be a great and wonderful day. It depends on you.

Pikle6

#10
May 04, 2009, 04:21:21 PM
Quote from: sahilkit on May 04, 2009, 10:16:29 AM
are u guys doing all this by yourself

of course Sahil we did it by our self check out the video's at our website. And by the way you don't get V22 osprey foam 1/32 scale model for sale at Ebay. Making a VTOL is not a simple job - 8 months of detailed research and by far 1 month of build time and half a month of testing has gone in the project. most of our parts were sourced by Sai uncle and the remaining one's are coming from tower hobbies. every part of the plane has been carefully chosen keeping in mind the problems it shall face. but how much ever you plan you need some VTOL and stabilization basics and experience to get every component tuned up for example the piezo gyro wouldn't suffice so we are choosing GY401 gyro. Another drastic improvement was the v tail mixer which would not give us our results. so we are going for TH-2 custom made V-tail mixer which can control gyro output and is specially programmed for VTOL. By the way next time you visit drop in a suggestion.
E.V.Subramanian
Yak55|EasyFly Glider 1.9m|Skyfun|Easystar II|Quad Talon V2|Mini Saturn
Print
Go Up Pages1
User actions