Motivated by Addixtion XXL- Scratch Build Thread

[umayash1]

After a long planning process I'm finally ready to start the build! This project began in January of this year, when I decided to build my own Addiction XL, inspired mostly by the Thrilling flying characteristics of PA Addiction X.

The plane will also be entirely built-up from balsa and ply, except of course for the motor cowl and canopy.

Specifications
Wing span - 55" /1400mm
Length - 59" /1498mm

Drive System which I have is:-
Turnigy Aerodrive SK3 - 5045-500kv Brushless Motor
Turnigy Brushless ESC 85A w/ 5A SBEC
Turnigy nano-tech 3000mah 6S 25~50C Lipo
VOX 15x6 prop wooden propeller



it will be a scratch built, therefore it will not have any plan

Please dont PM me for any plans

Tanmay..

[umayash1]

Red & White color scheme is planned Color. Motivated from Extreme flight R/C, I Love this scheme a lot..
Fuselage part is still in making..

[rcpilotacro]

superb ! subd !!

[yash10896]

Good Luck sir !!
Subscribed

[umayash1]

@rcpilotacro, Yash10896:- Thanks.

Final Color Scheme..

[rcpilotacro]

She is 'Fly Low' Girl

[sundaram]

Superb Tanmay 

Closely following

[umayash1]

@Sundaram Sir:- Thanks..

[sanjayrai55]

Fantastic Tanmay. This is going to be really good.Will be following most eagerly!

And yes, you keep the aeromodel, I'll keep the other model 

[umayash1]

@Sanjayrai55:- Thank you so much sir.
BTW, So far that's not true. I Have actually learnt so much from your build threads.

[K K Iyer]

@umayash1
In the process of ogling pic no. 2,
all seniors missed the special crosswind landing undercart in pic no. 3!

[umayash1]

Lol..

[rcpilotacro]

true, it is called "Pant assisted Braking" 

[umayash1]

Continuing, here are some photos of the laser cut parts themselves, The parts will go into the Fuselage as well as in the wings. Each Balsa sheet is only 28" long due to the limitation of the laser cutting machine, which doesn't have a cutting area that will fit full length (36") balsa sheets.
Size of Lite-Ply Sheet is 1/8" x 15" x 29",They contain mostly the fuselage parts, but some parts for the wing are of Lite Ply as well.

[umayash1]

......

[sanjayrai55]

Very professional . Where do you source your lite ply from?

[sundaram]

All this while I was drooling over Tanmay's excellent laser cuts  and contemplating how to whack off the complete kit.  

I have been for long planning on getting myself one of these for my OS FS-30.

Sbach 342 30E
http://www.aliexpress.com/item/DIY-RC-Model-Plane-Sbach-342-30E/1677399677.html (Rs 7257/- including shipping) (WS - 1210mm recommended 0.25 glow equivalent)

Yak 54 3D
http://www.aliexpress.com/item/Yak-54-3D-Fly-RC-Hobby-Plane-Wood-Frame-Without-Cover/966483106.html (Rs 5850/- including shipping) (WS 1010mm recommended 0.15 glow or equivalent)

Cost seems to me like slightly on higher side (Being used to hobbyking laser cut kits)

Tanmay How does your cutting costs including raw material fare in comparison to the above two?

[umayash1]

@Sanjay Sir, Sundaram Sir:- PM Sent.

[umayash1]

While I was waiting for the Plans to get Printed just tried a Dry fit, and see how it looks like.

[umayash1]

Some Pictures of PA Addiction XL.

[umayash1]

Also Working on My Dream project of  Extra 260 92" Powered By DA-60 As Well.

[Mjet]

Great Tanmay...superb..

[umayash1]

@Mjet:- Thanks.
Started Working on Fuselage today, Here are some Pictures..

[umayash1]

...

[umayash1]

Some More..