Print Page - Building a quad

Title: Building a quad
Post by: rajsigma on August 05, 2011, 10:42:36 PM

Hai
Now i buils one quad look some pic and give reply
Quad frame by hemanthtguru from davangere
Motor and esc from hk
Prop adopter from rcbazaar bangalore
KK Copter board

Title: Re: Building a quad
Post by: hemanthtguru on August 06, 2011, 04:12:28 PM

got the build, sir i advise u use other center plates for now, i will send them to u today, don fly the the quad with these center plates,

the center plates are for professional quadflyers...pls wait and change the center plates...

Title: Re: Building a quad
Post by: rajsigma on August 06, 2011, 10:15:28 PM

Ok thanks for advice

Title: Re: Building a quad
Post by: rajsigma on August 07, 2011, 10:56:20 PM

Some more pic

Title: Re: Building a quad
Post by: hemanthtguru on August 08, 2011, 12:23:36 AM

sir on one arm use 2 black legs, so that u will come to know the front of the quad when are flying,,,

Title: Re: Building a quad
Post by: rajsigma on August 10, 2011, 04:07:32 PM

quad work is over ,mostly test fly @ 5:30 pm

Title: Re: Building a quad
Post by: rajsigma on August 10, 2011, 04:09:50 PM

One more photo

Title: Re: Building a quad
Post by: rjshkmr on August 10, 2011, 10:32:13 PM

well, all i can say is that it looks really neat!

i can't comment on the design etc, as i am not a plane-guy... that "Plane Lover" tag was kinda forced upon me!

Title: Re: Building a quad
Post by: rajsigma on September 24, 2011, 03:23:04 PM

Now i use Hobby King quadcopter controller board . I think it is good for beginner.

Title: Re: Building a quad
Post by: rajsigma on September 24, 2011, 03:33:08 PM

http://www.youtube.com/watch?v=5igBnGdw3CA

Title: Re: Building a quad
Post by: spitfire on September 24, 2011, 10:15:54 PM

Nice build ! :thumbsup:

Is this your first flight? How difficult was flying the model?

Title: Re: Building a quad
Post by: rajsigma on September 25, 2011, 08:23:35 AM

Thanks :)
Ya this is her first flight,it want to trim.

Title: Re: Building a quad
Post by: spitfire on September 25, 2011, 03:10:57 PM

Can you post you transmitter settings?

Title: Re: Building a quad
Post by: rajsigma on September 25, 2011, 03:48:20 PM

Tx setting
Aliron -15% expo
Elivator -15% expo
Rudder -80% expo

Range pich,roll,yaw 100%

Title: Re: Building a quad
Post by: spitfire on September 25, 2011, 04:10:47 PM

Which type you were using heli or aircraft ?

Title: Re: Building a quad
Post by: rajsigma on September 25, 2011, 04:19:56 PM

Quad needs aero mode

Title: Re: Building a quad
Post by: spitfire on September 25, 2011, 04:26:55 PM

:thanks:

RC India

RC Models => Self-designed, DIY and College Projects => Topic started by: rajsigma on August 05, 2011, 10:42:36 PM