Print Page - DIY "Prop Adapter" on top of "prop saver"

Title: DIY "Prop Adapter" on top of "prop saver"
Post by: ManashRaja on January 04, 2015, 11:25:12 PM

Had a lot of problems with prop saver and so made my own prop adapter using parts of two pens and some glue. No need of any change on the motor, as it just sits on top of the prop saver.

www.youtube.com/watch?v=KR0hxN82kxA (//http://)

Future modifications:
i) Shorten the prop adapter base
ii) Balance the whole arrangement.

Title: Re: DIY "Prop Adapter" on top of "prop saver"
Post by: sooraj.palakkad on January 04, 2015, 11:32:01 PM

You can embed the video here by just removing that "https://" part from your link.

Title: Re: DIY "Prop Adapter" on top of "prop saver"
Post by: ManashRaja on January 04, 2015, 11:37:00 PM

Quote from: sooraj.palakkad on January 04, 2015, 11:32:01 PM
You can embed the video here by just removing that "https://" part from your link.

Thanks for the help.. I am new to this forum

RC India

RC Models => Self-designed, DIY and College Projects => Topic started by: ManashRaja on January 04, 2015, 11:25:12 PM