Print Page - Easy way to balance props using a 9g servo parts

Title: Easy way to balance props using a 9g servo parts
Post by: Imperial fire on February 10, 2018, 04:21:20 PM

https://youtu.be/qVin1QYQQTQ

Should have tried this some time ago...

Title: Re: Easy way to balance props using a 9g servo parts
Post by: rishabhbarma on February 10, 2018, 04:43:09 PM

Or one could add tape instead of chopping the prop.

Title: Re: Easy way to balance props using a 9g servo parts
Post by: Aravind298 on February 10, 2018, 06:05:53 PM

You're chopping off the propeller? That's seriously NOT recommended. As Rishabh has suggested, it's best to use a cello tape.

You will lose some thrust or maybe increased vortex generation might take place. Well that's definitely a NO to multirotors.

Title: Re: Easy way to balance props using a 9g servo parts
Post by: Imperial fire on February 10, 2018, 07:10:22 PM

No I never. Chop off props...that's a stupid thing to do...it will totally wreck it's function..😂😂😂
This was a broken 9 inch prop.... Just wanted to make. A quick video to demonstrate it's function

Title: Re: Easy way to balance props using a 9g servo parts
Post by: Imperial fire on February 10, 2018, 07:12:33 PM

Also instead of cello tape one can use acrylic colours or glue layer to do it... Coz tape might sometimes come off

Title: Re: Easy way to balance props using a 9g servo parts
Post by: Aravind298 on February 10, 2018, 08:13:13 PM

Quote from: Imperial fire on February 10, 2018, 07:12:33 PM
Also instead of cello tape one can use acrylic colours or glue layer to do it... Coz tape might sometimes come off

Yup. That sounds intelligent!

RC India

RC Models => Self-designed, DIY and College Projects => Topic started by: Imperial fire on February 10, 2018, 04:21:20 PM