hey..
i have finally completed my first rc plane.. its made from styrofoam..

wing span 42inches
length 30 inches
flying weight with dihedral wing 650 approx
flying weight with flat wing 600grams
motor Cf 2280 1200kv
ESC (havent figured out ... suggestions needed)
prop (havent figured out ... suggestions needed)

...

...

k this is the best part..  i have made two separate sets of wings.. one is dihedral and another flat...  lol...

...

Dude, dihedral is what you should be looking at for your flying skills! You have mounted 2 servos on the dihedral wings, you have a 6 channel radio and you need to have 2 spare channels for the miscellaneous work you plan to do! It means you have to have to have a 7 channel radio or you got to connect the 2 serovos to same channel and trim manually.

also why are the servos standing? they are supposed to be sleeping.   

Also the motor mount is supposed to be 2 deg right and 2 deg down. from the pics it looks like its looking up!

Can some one please tell if 1.5 A bec support  5 to 6 HXT 900s and an RX?

Seriously good effort! Some nice paint scheme and ur plane is gonna look great! Use the dihedral wing to learn on and then move onto the flat wing once ur confident.. Just make sure ur motor points a few degrees down and right and ur CG is correct..

good job...nice...