Quote from: Ashta on September 15, 2010, 03:49:37 PM
medicineman,
very nice flier!. very slow steady and stable. congrats.
ashta

Quote from: divay99 on October 08, 2010, 11:26:08 PM
wow.... congratulations and celebrations

Thanks guys! I was offline for such a long time.. Jus saw the thread 2day..

Quote from: controlflyer on September 15, 2010, 09:32:47 PM
Aneesh!
Why don't you camo paint it? 
All my planes and helis are always camo...hehehehe...I don't know why I do that but, just like the paint!!

I like camo paint too

Quote from: R C on October 08, 2010, 06:24:56 PM
Prateek i just forgot abt it, i dont have the video now with me, i will post it on sunday.

Hey, please post the video even I haven't seen the video yet..

The 2nd flight video (which I had posted in another thread)..





Hey guys, some pictures of the painting process of the Glidiator.. Its been stripped of all electronics/pushrods etc.. I'm using Acrylic colours (orange/black).. Our college recently purchased huge refrigerators and so I got tons of bubble wrap which you can see spread over the floor.. Its keeps popping when I walk around which gets quite irritating but then it protects the floor so I don't mind

Some more pics..

Here is the completed Glidiator.. Sorry for updating so the thread so late but I barely get any time for RC nowadays.. The decals are the GWS ones which I downloaded.. I printed the outline and then painted on it with the colours.. Then I cut them out and glued them onto the wings with Fevicol.. The electronics are yet to be installed.. Waiting for the paint to dry

The last pic shows the modification done to the wing.. I've wrapped pieces of coro around the LE & TE near the center portion so the rubber bands don't bite into the thermocol.. Also I've cut into the wing near the TE as the plane was a bit tail heavy even with all the weight moved to the front.. Hopefully this will fix the issue.. Test flight in the evening if weather prevails..

What do you guys think? Waiting for your feedback

Nice paint work and flying medicineman. 
I would like to get some more info on your build process
1. Do you have the (pdf) plans for this or atleast the dimensions ?
2. Are your pushrods made of 4mm patti (beading)?
3. @what voltage did you use the hotwire and what is your string length ?
4. How much did you pay for the 12v 5A transformer ?
5. What is the reinforcement that you have used for your thermacole wing ?
6. Is the acrylic paint directly on the thermacole or do you have the kite paper as you planned earlier ?

This would be a very good reference for new scratch builders.
Great log and keep em coming.     

Woah wicked lookink glider there - suits the name glidator

Thanks guys 

@Drone:
1. PDF plans coming soon.
2. Pushrods/wood frame for the body/wing reinforcement are all made from the same wood patti which was sliced into sticks (approx 4mm x 4mm cross section).
3. Hotwire works on 12v transformer so voltage must be around 13v. Didn't measure the voltage.
4. 12v 5A transformer cost me 350/- Rs in Mumbai.
5. The thermocol wing has a single spar (the same patti sticks from point 2) running across the top of it. The polyhedral angles are held by two 1.5" pieces of cycle spokes bent into that angle and glued on either side with CA. If you look carefully you can see it in the above pics. The spar sticks out about a third of a cm on either side for ease of balancing CG.
6. Paint is applied directly on the thermocol. It holds the paint quite well. But while painting on the coro you must sand it down, then clean it nicely and then paint it with a thin coat..

Hope this was helpful For the wing reinforcement see some of the earlier pics..

Hey guys, just did a flight.. The cut in the wing fixed the CG issue.. I had a awesome flight!! Flew for over 12 minutes.. Did some inside loops as well as outside loops.. This is my third flight ever.. I'm so excited!! The video is shot in 720p so can't upload it so soon.. Also the camera kept losing focus again and again for some reason.. Will cut out the blurry parts and upload the video soon..

And I also let my dad fly.. He flew quite well for a few seconds but the tried to nose-dive straight into the ground so I had to take over

And what do you guys think about the paint job? (see the pics above.. 4 posts up)

i love the paint job, it a whole new plane now. waiting for the video.

I got 2 woids for you!!
Awesomely superb!!

I must say for a guy in a mental asylum, getting this kinda outcome is like the "zeroth law of thermodynamics"

Amazing work done fellow brother..

Looking at your flying skills, we will have atleast one flyable plane in December

coooooooooooooooooooooollllllll!
good use of your surgical capacity hands!

Thanks guys.. Sorry for not replying earlier.. Was surfing from my mobile and was having trouble replying..

Quote from: controlflyer on October 31, 2010, 11:45:10 PM
I must say for a guy in a mental asylum, getting this kinda outcome is like the "zeroth law of thermodynamics"

My psychiatry posting is finally over! A few more days there and i'd go mad..

nice job

Nice build and thanks for sharing.

Any clue about plan.

umm..... im still trying to build ma first plane........... can u help me....    by the way, what is your plane made of? can u post more pictures so i can build one too??

i just saw the pics u posted, and could u tell me the exact dimensions of the plane?

Please read through this thread and others carefully, and do not try to do this like "fast food"

The material details and part of the dimensions are in this thread, just go slow and methodically to spot them !

http://www.rcindia.org/self-designed-diy-and-college-projects/glidiator-my-first-trainer-build-log/msg30109/#msg30109

Hi Aneesh,

Gone through your whole thread on the build log -Very well written & explained with picture & illustration & also some Videos. Just imagine your how could you help a new aeromodeller ,This thread is great for beginner Very well written & also flown ,I've very surprised to see to fly so well on the electric.Great -Im proud of you for not giving up on aeromedelling.Do keep it up.

Very surprising that you have suddenly  disappered my self & noel have been flying the our nitro engine.I've got a jupiter -Pattern flying -just great at the beginning she was totally instable due to CG as this model has 6 servos & a very long fuselage but after making some minor modification,she is flying great ,In fact Noel & self flew both together & we very chasing each other.

Missed you. do reply or call -If weather is good tomorrow will go to fly ,your welcomed

regards
peter

Hi
A wonderful a/c & an inspirational build.
Can you please share the dimensions?
It would be of a great reference for building an aircraft.

Regards
Vaibhav

I did read

Quote from: anwar on May 29, 2011, 01:59:32 PM
Please read through this thread and others carefully, and do not try to do this like "fast food"
The material details and part of the dimensions are in this thread, just go slow and methodically to spot them !
http://www.rcindia.org/self-designed-diy-and-college-projects/glidiator-my-first-trainer-build-log/msg30109/#msg30109

Thanks i got reference sizes from
http://www.rcgroups.com/forums/showthread.php?t=836844
http://www.rcgroups.com/forums/showthread.php?t=1138106

Friends..its an awesome machine...nice job...