Quote from: izmile on October 07, 2010, 03:48:20 PM

Thanks.

@ Ashish!
I already have started with the materials selection for the SU-47, am making a small prototype to feel the curves
will post pictures sooner!
Build thread will consist of converting a pusher to a full profile EDF

@ RC - how is the progress on your wing?? seriously!! this thing looks killer, like a stealth bomber!

Hey Dorwin,

The model is ready to fly, only need to do the pushrods. But will maiden this model next week, very busy.......................   

The total weight of the airframe with the motor & canopy is 330 grams.
1) servo 2 x 9grams = 20 grams.
2) battary              = 90 grams.
3) Esc                   =  25 grams.
4} receiver             =  30 grams.
5} pushrod & horns  = 20 grams.
6) prop                  = 30 grams.
7) Extra weight       = 30 grams.
                TOTAL   =245 GRAMS.

So i guess the model weight will be less then 600 grams.

I am planning for the below mentioned power system.
Power system:
EMAX CF 2812 (RCD)
1000 mah, 3 cell ( I also have 2200 mah 3 cell, but the weight of the battery is 150 grams)
8x6 or 8x4 or 7x6 prop ( I will try with all these props )
30 amps esc.

2812 is good motor!!!! will be perfect for this!!! 1st try with 1000 mAh battery, i think 2200 will be pretty heavy!!!

wish u all the best!!!!!

Quote from: ashJR7202 on October 08, 2010, 07:11:33 PM
2812 is good motor!!!! will be perfect for this!!! 1st try with 1000 mAh battery, i think 2200 will be pretty heavy!!!

wish u all the best!!!!!

Thanks ashJR7202,

Yes, i will try it with 1000 mah as it is lighter.

Hey awesome looking wing RC Looking forward to the maiden video

I have done some changes to the bottom of the model.

Attached is the pics.

Quote from: rajathv8 on October 08, 2010, 09:31:00 PM
Hey awesome looking wing RC Looking forward to the maiden video

Hey thanks Rajath.

FINALLY,

The model was maidened today, i was not able to fly for more then a 30 seconds as this was my first delta depron model.
It took 17 crashes & yet it survived.
One of my friend flew it for more then a minute & it was his first flight as he was into boat modelling.

May be next week i will try to fly it after practicing on sim.


Photos will follow

aavoiis!! solid murre tu..
don't worry bout flying and crashing now..there are a lota guys to motivate you on building new ones...hehehe

no worries you'll be able to fly for more than 2mins next time...

Quote from: controlflyer on November 21, 2010, 01:13:15 PM
aavoiis!! solid murre tu..
don't worry bout flying and crashing now..there are a lota guys to motivate you on building new ones...hehehe

Hey Dorwin,
How r u?
the model is not destroyed, it will still fly minor repair work and it will be up in the sky again.

Quote from: @k@sh on November 21, 2010, 02:42:14 PM
no worries you'll be able to fly for more than 2mins next time...

I will fly it next time...............

Hey congrata RC.Were did you maiden it?

Electronic City

Hey, congrats on your maiden! Are you getting it when ur coming down?

It was nice to see big brother of my mini KESL finally take it to the sky. Hope you are doing enough of Sim practice for the next weekend flying. wish you were on Mode-2. Would hook up my Rx next week and see.

And yes, some body knows how to get comprehensive accident insurance for R/C flyers ? Sarad's KESL nearly missed me on its long haul flight. It was really scary with a 8" prop spinning at its peak RPM!!

Few pics of my KESL before the crashes.............

few pics after the crashes,  this week i will repair the damages.
The nose is damaged & right leading edge is slightly damaged, both the fins are broken.

great can u built for me 1?