Hi Guys,

completed the hovercraft college project and i have attached a dry run video link. will upload the finial video soon.

used balsa ply as the base and balsa on the side panel. used a coro on the turtle hath. thermoplast in the front

http://www.youtube.com/watch?v=u3k7WY8-VU0&feature=youtu.be

electronics used:

2x64mm edf
1x60amp esc connected parallel
1x2210 emax motor
1x20 amp esc
2x 3s lipo 2200 mah
1x 3001 futaba servo

6ch futaba radio



had to successful dry runs awaiting for the final run!!!

 

thanks abhay!!!

nice project....good luck.....

thank you gokul!!!

great.. and your base also..

thank you roopesh!!!!.. this is my first hover craft built lol!!!!

First..? so great success..

thanks you so much sir!!!!!;D

 

Congratulations! Your skirt seems very efficient. Please post details ..................

Good build!

Quote from: VC on April 02, 2012, 08:36:15 PM
Your skirt seems very efficient. Please post details ..................

That's why we don't have any girls here who build hovercrafts!

thanks again....to all!!!

i m open to feedback guys.... let me know if there is any correction!!! as this is my first one!!!:)