Print Page - PVA MODELS hover craft (college project)

Title: PVA MODELS hover craft (college project)
Post by: Pradeep on April 02, 2012, 05:04:48 PM

Hi Guys,

completed the hovercraft college project and i have attached a dry run video link. will upload the finial video soon.

used balsa ply as the base and balsa on the side panel. used a coro on the turtle hath. thermoplast in the front

http://www.youtube.com/watch?v=u3k7WY8-VU0&feature=youtu.be

electronics used:

2x64mm edf
1x60amp esc connected parallel
1x2210 emax motor
1x20 amp esc
2x 3s lipo 2200 mah
1x 3001 futaba servo

6ch futaba radio

:thumbsup:

had to successful dry runs awaiting for the final run!!!

Title: Re: PVA MODELS hover craft (college project)
Post by: abhay on April 02, 2012, 05:44:26 PM

:thumbsup:

Title: Re: PVA MODELS hover craft (college project)
Post by: Pradeep on April 02, 2012, 05:45:13 PM

thanks abhay!!!

Title: Re: PVA MODELS hover craft (college project)
Post by: Gokul ravindran on April 02, 2012, 06:09:02 PM

nice project....good luck.....

Title: Re: PVA MODELS hover craft (college project)
Post by: Pradeep on April 02, 2012, 06:36:51 PM

thank you gokul!!!

Title: Re: PVA MODELS hover craft (college project)
Post by: roopeshkrishna on April 02, 2012, 07:22:37 PM

great.. {:)} {:)} {:)} and your base also..

Title: Re: PVA MODELS hover craft (college project)
Post by: Pradeep on April 02, 2012, 07:23:41 PM

thank you roopesh!!!!.. this is my first hover craft built lol!!!!

Title: Re: PVA MODELS hover craft (college project)
Post by: roopeshkrishna on April 02, 2012, 07:34:44 PM

First..? so great success.. :salute:

Title: Re: PVA MODELS hover craft (college project)
Post by: Pradeep on April 02, 2012, 07:35:42 PM

thanks you so much sir!!!!!;D

Title: Re: PVA MODELS hover craft (college project)
Post by: roopeshkrishna on April 02, 2012, 08:02:43 PM

{:)} {:)} {:)} :salute:

Title: Re: PVA MODELS hover craft (college project)
Post by: VC on April 02, 2012, 08:36:15 PM

Congratulations! Your skirt seems very efficient. Please post details ..................

Title: Re: PVA MODELS hover craft (college project)
Post by: Swapnil on April 02, 2012, 08:52:53 PM

Good build! :thumbsup:

Quote from: VC on April 02, 2012, 08:36:15 PM
Your skirt seems very efficient. Please post details ..................

That's why we don't have any girls here who build hovercrafts! ;) ;D

Title: Re: PVA MODELS hover craft (college project)
Post by: Pradeep on April 02, 2012, 09:05:42 PM

thanks again....to all!!!

i m open to feedback guys.... let me know if there is any correction!!! as this is my first one!!!:) :thumbsup:

RC India

RC Models => Self-designed, DIY and College Projects => Topic started by: Pradeep on April 02, 2012, 05:04:48 PM