This is my self designed flying carpet. made by depron and coro(same ad board ;)), 1100kv bl motor, 8x6 prop, 2x 9g servos, 2S 1300mah lipo, weighs below 200g. elvon mixing is done. again this is scratch built ;D
http://www.youtube.com/watch?v=qlA57r95ex0 Have a look at the video. I should practice much more on elvon mixing. It was a bit windy then.
nice backyard flyer {:)} {:)} {:)}
guess u dont have to search for a large field to fly anymore :D
exactly ;D you can see it assending in a spiral way ;)
Yes these are High alfa plane types like the flying pizza or the Pizza box flyer .
Great effort Akash good job {:)} {:)}
Sai
Thank you very much Mr Sai :)
hey akash nice one {:)} by the way did you have any orientation problems i for one could not make out (sorry still a beg.)
best
sahil
why don't you post some plans if u are up to it,may be other will try it out :)
sahil
hi sahil, at first i had serious orientation problems. If i get inverted and fly too low, i often pull up the elevator and hit it directly to the ground. i painted the bottom part red so tat i can find out whether i am in normal or inverted. Then i tried on fly by nose method, which improved my skills very much. had lots of practice in sim and got confidence. still practicing on elvon mixing(am also a beg only :))
regarding the plans, i didnt go for a serious calculations or anything. all i kept in mind was to keep the weight less, optimum thrust and big wing area (so tat i can glide and rectify my mistake in control, else i may hit it). i will create a plan for this model and post it soon. pls note elvon mixing is not suitable for beg. instead one can try for a elevator and rudder type control.
akash
Reminds me of my PBF... :-\
Hope you don't mind posting my video here..
http://www.youtube.com/watch?v=00-44QMv2Ss
wonderful {:)} {:)}... it takes the weight of glow engine and what material is that?
Its just a square peice of coro.. Its just 3 hours of build time and lots of fun. No fear of crashing either...