Sent as a payload using a drone
Sent from a Mango using a Knife

How do you get such creative stuff?
Any specific messenger?
Okay.
THanks

can i build a smaller plane of this same type out of 3mm depron with one sided paper peeled off?
http://www.outerzone.co.uk/plan_files_05/5345/Aiglet.pdf

That plane looks perfect. You can surely do it.

Quote from: prabal276 on May 30, 2016, 10:43:13 AMSent from a mango using a knife.
Sent as a payload using a drone.

How do you get such creative stuff?
Any specific messenger?
Okay.
THanks

These ideas just come out of random places in my brain, observation skills maybe?

Pm me, I'll send some of my shayaris to you.

anybody?
Will the above glider work?

http://document.li/66kA

http://document.li/fHH1

i was thinking of some thing like this

Thank you bhaiya.
Right now i need to decide on the airframe.
GUYS PLEASE drop suggestions the date is coming closer.
Will the gliders suggested above work?

Balsa airfsame and light covering .
Weight is crucial , oh very crucial.

Quote from: Aneesh.P on May 17, 2016, 10:36:37 PM
@prabal276
initially im my project for testing cells ----1 cell is cut into 3 parts and thats giving 1/3rd the rated current
that means for using it as a 2s u need 8.4v around--(.56v each cell)--u need 15 cells-ie 15 cut cells=5 new cells-700-800rs(rc hyderabad)
each cell is 12.5x12.5cm  ie 12.5x5=.625m wing span and with a minimum chord of 14-15cm
each can give u a rated current of 1.75amps (tested)(9.30am-1pm mostly)
each cell weighs 8grms--40g
tabbing wirs around 10g

All u need to do is build a .7m or more depron wing and cello tape or transparent sheeting -to stick solar cells
keep a balsa stick or cf as body
depron sheet tail with micro servos or actuators

and most importantly a good coreless brushed motor geared setup-(this im not sure) and mini reciever and esc(a single mini chip models)

let me know your views
plane posted weighs around 200grms(2 bottles as fuse(50g))

Regards
aneesh

Bhaiya ;
how do i wire the cut pieces?
Can you draw me a circuit diagram.

ok i am goin with the ft simple soarer.
Someone pls, tell me how to wire the panels.
Now i need 11.1 v out of them at 6-7 amp.
I have ordered 10 pieces.

How is the project coming along? No updates for a long time..