Yep, stop buying those Techone foamies and starting cutting the foam 

Hi subbu,

i hv put in some pics as u wanted it..Try to put in some velcro so that the wings dont move at all.

I had a weird accident on my easy star.

Easy star was abt 100ft in the air and the wings just came out  . The prop disappeared, wings were flying to one side and the fuselage just rocketted down to the ground * bang * but no harm done i was in the air within 10 minutes..

Hope these pics help you decide on hw to attach the wings on the fuselage..

Cheers

Atul G.

Quote from: anwar on July 09, 2009, 11:00:57 PM
Yep, stop buying those Techone foamies and starting cutting the foam  

Sounds like someone on our neighboring forum  

Quote from: rcforall on July 10, 2009, 09:00:24 AM
Sounds like someone on our neighboring forum   

Ouch ! That hurt 

Sounds like someone who just wants to ACT nice 

That is the best part here friendly open exchange of info and swipes at each other just for fun   

hey atul bhaiya thanks for the pics they help a ton sorry could not respond to sms as i was in school

hey guys test fitted everything and everything works very good the only thing is that if the plane is underpowered i am using 2212/10 bl and at full throttle it doesnot even move forward in the ground though i have not taped the bottom another suggestion could be to use the bigger mammoth 222w motor from sai uncle will post details a little later

The Easy star uses a  small prop becuase of the mount position , you cannot use a prop more that 6 " hence to generate enough thrust you need a high KV Motor like the 2212/06  with a 30 amp ESC 2212/10 cant work.

Sai

just curious, won't it be ok to mount the motor on the nose of this plane?

hey sai uncle actually in the previous pics if you see i have used 2212/06 but i thought that it would be tooooo overpowered for the plane hence i used the2212/10 anyways will change it back to 2212/06

hey guys testing it tomorrow with the powerful 2212/06 and just a little info the planes wingspan is about ten cm more and the plane has a lot of cf embedded into it thats the reason the planes weight is around 600-700gms

hey subu, post a pic or a video man.. lets c the finished easy star (indian version)..  

i think i agree with tg here, try to put the motor on the nose as an experiment..

cheers

atul g.

of course i will  put in the video in a couple of hours as my mother has asked me to clean my room     anyway dont move anywhere i will post it in an hour

and for the experiment i will put that in the next sunday

i shall be putting in the video with the 2212/10 as yet to solder connectors to 2212/06

heres the pic guys and video coming up in a minute

also it will have a paint with flames and decaling from nick my friend

atul bhaiya and anwar bhaiya before you sign out just check the video it will be up in a moment

wait a sec please its being processed

Good work subu.. 

In btwn wats the thickness of those wings ?? You think they will be able to take some heavy winds

this is going to be a great flyer.. spray paint it..

Bravooooo.... 

Make sure you have a dedicated cameraman around when you test fly this !

sure guys i will do whatever you guys say i am thinking of flying this with pramod bhaiya

Great effort..  . Would love to see it fly.

-Ismail

thanks guys i am overwhelmed by the response

hey guys my fear of this setup being underpowered vanished as soon as i attached the landing gear on the plane and this plane shall take off with the same setup i.e 2212/10 (though it was not meant to be a pusher motor  )