Hey all ,
After long time, finally I have built up my own Piper cub (40" wingspan EPS model cut from thermocol used in packing of AC) . I have read a lot of posts, discussions & messages from this forum . This helps me a lot for building my Piper cub. Now I have to give final touch by adding electronics. Here are some pics :

"The picture quality is very poor so please forgive me because i take it from my 1.3 MP phone camera"


Will also try to add its maiden flight

nice build..is the material biopack?

Sorry I don't have any knowledge about biofoam. It is high density thermocol commonly used for packing of Air conditioner, Refridgerator etc.

have u used hot wire cutter?

Good Work going on.
Best of Luck

Good work.keep it up.....waiting for maiden.........

Thanx for complements ,

Yupp I used Hot wire cutter which I designed by PVC pipe.

Then a lot of sanding works gave it a sharp figure.

Wow

Wish you had some photos of the material from which you started off (I mean before cutting the foam into shape).

really impressive 

wow cool finish 
what is the length the fuselage

Really good work...!  
Have you followed any particular plan or something...?

Sorry Anwar bro

Unfortunately I don't have pre built pics (esp. raw material) of my cub due to lack of good camera. But next time I promise that I will also upload some pics and videos of build log.

Yup I followed a plan of "blu cub" (basically a bluefoam plan). But due to unavailability of Bluefoam in India, I decided to convert this plan into Thermocol design. I changed only fuselage a little bit (generally 2D to 3D) with my little knowledge which was recently earned by rcindia.org and rcuniverse.com.

Here goes the specs:-
Fuselage + wings + rudder + elevator = all built up by high density thermocol (small grains)
1. Wingspan:- 40"
2. Fuselage length:- 28"
3. Motor:- Brushless Outrunner TowerPro2409-18 1000kv / 180W
4. ESC:- DYS 30Amp
5. Prop:- 9x5
6. Battery:- Turnigy 2200mAh 3S 25C Lipo Pack
7. Servos:- (03) HXT900 9gm 1.6 Kg/cm

Finally thanks for the overwhelming response.

But guys please don't get excited until the success of its maiden flight.