if you need the pics let me know i will put them too

hey anwar bhaiya do you know how can plans be converted to tiled pdf one's please tell mee as i dont know how

I haven't tried that myself.  But let us start by understanding what you are trying to do.  It is pretty clear you need some kind of PDF writer, the issue is which ones support resizing.

What kind of document format is your image in now ? 

If it is already a PDF, this one looks like a simple way of doing it: http://www.lucubration.com/open-source-projects/pdf-tile-printer.html

hey guys how are you people today i am very sad rain has not stopped from yesterday night the plane will have to wait another week anyway i tried to taxi it down the parking lot and at half thottlr the plane was in air and i had to bring it down so it did not hit any car is anyone interested in buying tiled plans for 500 rs if yes tell me i will make

if you want the model also please tell me i will be happy to make one for you and the cost would be 1000 rupees as i am collecting money for something big and also the plans come in a cd with instuctions

test flight is today guys after school in a ground near the school

hey guys switch on the tv and tune into any news channel. BREAKING NEWS MUMBAI'S FLOODED AGAIN AND NAVI MUMBAI EXPERIENCES STORM SHOWERS. am praying to god to stop this as soon as possible as i need to fly my easystar

and one more thing our school declared holiday due to rain

Just now checked this thead, good work Subbu...

But I feel more jealous of you really! Such a small kid is building and going in Mach10 in RC.

I really got inspired... and let me post my Scratch building thread of 'Trainer 1' which is easy to fly and a good plane for noobs.

MEROG

Dear Subbu,
Great work on the EasyStar Replica! A further note of encouragement, its a great model to scratch build........ ask me how I know....... been there, done that!

Mine is christened the Easy SpadStar - the reason being that the elevator, rudder and the polyhedral add-ons are 3mm coro. Frame is 8mm plywood rod, wing spar is bamboo. wing had 3 degrees of built in dihedral. fuselage and wings is Thermocole fully laminated with packing tape (very tough and light, holds its own in crashes - ask me how i know!) canopy is a hacked sprite can, motor - 1400kv, esc - 20A and battery - 3s1800mah ( a 1000mah would do but this was what i had spare) prop APC 8x5, Maidened at the Sholavaram Airfield on a Saturday Evening a month back.

Am attaching a couple of pics. Hope I motivate u a bit more - not that u aint motivated enough.....
Gud luck.

Hey, btw the pics r here.................

No money can buy such a cockpit   

Nice one !

Edwin ,
that is great stuff come over sometime to Kovalam , would love to see it fly .
Is the Fuse a PVC  conduit pipe , if not I think that could be a great  substitute as well.

Sai

Dear Sai Sir,
The fuse is actually an 8mm plywood reaper. On the maiden day, after close to 10mins of flight, the Easy SpadStar was caught in crosswinds and i panicked......... and crashed nose first........ and broke the reaper right in the middle.... planning to replace it with a cf tube like in Mr Moss..... would be a lot lighter, i guess. I would be walking into ur office sometime monday or tuesday for the cf and a tx lipo.
And btw, ur thread on props is gr8.

hey guys day before yesterday i finally got a dry spell the plane was test glided first to chech the cg and it was perfect but before we could start off with the power on rain god blessed us with a heavy burst of shower all electronics are safe

oops forgot to congratulate martian 2121 (i believe edwin) on your successful plane

Thanx Subu.

Hi,
Is there any substitute for easystar 2200Kv in outrunner and matching ESC.

Snehal

Yes you can find lots of out runner which run better than in runner on an easystar.
I am using this right now, all info about the setup is available on that page.