I am planning to make a tricopter...
I am confused which type of model i should go for?
one is i can use 4 gyro (3 on each branch, and one for yaw, doing mixing in tx)
and second option is using HK quad board v2 (on board 3 gyro, roll pitch and yaw, doing mixing on board)
the second one would be effecient will cost me half the first one...
but programming it will be the issue... i have never done it before...
can any body explain pros. and cons. of both models.....
hi karan i am from bharuch. i am working on quadcopter(check my thread).
You don't need 4 gyro. As a beginner go with hk board,it comes with quad mode and plus config. If you want to use it for tri you have to program it with tri program using usbasp cable.
There is a cheap programmer also on HK now :
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=21321
And remember to get these also, saves some time !
http://www.hobbyking.com/hobbyking/store/__21758__10CM_Male_to_Male_Servo_Lead_JR_26AWG_10pcs_set_.html
thnx!!!
i was unaware about this avr programmer!!!!!
i will get this one!!!
if u need only the programmer u can buy it from here just to save ur time
http://store.extremeelectronics.co.in/USB-AVR-Programmer-v2.1.html