u cant do anything with analog or gyro or transmitter cause if u change endpoints it will mess up the whole setting ...thats y i was insisting on using digital i dont have this problem

okay thank you,

for time being i am using these servos,

leveling is good at midstick but full negative and positive hairline of gap is there, will that make the heli unstable?

not that much 

this gyro has a very straight forward setup n works very well and all use digital servos on flybarless so no body checks for analog 

thank you, i am waiting for savox in RCB.

if i am ordering from HK, do i need to pay in customs?

if your are ordering only servos i doubt ....if u have never ordered and your ordering first time let someone else order for you

can u order for me?
if u can, i will let u know,

suggest cyclic servos for 450 from hk?

Quote from: Shannon on April 08, 2013, 04:14:34 PM
u cant do anything with analog or gyro or transmitter cause if u change endpoints it will mess up the whole setting ...thats y i was insisting on using digital i dont have this problem

That doesn't sound right.  You can always tweak the end-points to get it to be level towards the extremes also.  See this previous discussion :

http://www.rcindia.org/helis/building-a-heli-for-the-first-time/msg9644/#msg9644

http://www.rcindia.org/search2?search=ccpm+interaction

If the comment is about analog servos having poor centering (ie, consistent range of motion) in general, then it may be valid.  But eliminating CCPM interaction is independent of servo type.

i am having fbl head with avionic x5,

how can i tweak at the endpoint because, all the setting are done in GYRO,
there is no setting to adjust the endpoints,
can i do that in tx?

yes anwar sir but when using a flybarless gyro it is a totally different thing messing with the endpoints ...the endpoints always need to be at 100 if we increase or decrease after set up alot of things change and become unbalanced

ccpm interactions can only be done on flybar setup using endpoints on flybarless the problem does not arise due to the use of only digital servos .....

http://hobbyking.com/hobbyking/store/__24764__TGY_306G_HV_High_Voltage_Ultra_Fast_High_Torque_MG_Digital_Alloy_Cased_Servo_3_7kg_05sec_21g.html u need to get 4 of these the best right now 

okay thank you,

i will let u know if i need, can u order it for me, but not now.

Ah.. I overlooked the fact that this is FBL.  But CCPM interactions are a fact of life (FBL or not) even with digital servos. Better units like the Mikado VBar allow us to tune this out in their settings/software.

yes sir but so far i have used digital and never faced a problem of ccpm interactions  ....break break ....yes i will order if u want later 

 

thank you

dont haste in the build go slow but buy good stuff so u dont regret later .........

Quote from: dineashkumar on April 08, 2013, 03:52:15 PM
in fb heli, i adjust the positive and negative swash level using endpoint adjust,
in fbl avionic x5 what should i do for leveling at full positive and negative?

thanks

http://www.beastx.com/showthread.php?2460-leveling-swash-at-full-neg-and-pos-pitch

http://www.rcgroups.com/forums/showthread.php?t=1733412

yes i am aware of that but this aint a beast x v3 ..it should not matter u will be doing general flying anyway ...later on get the digital servos .....i have never seen uneven throws on a digital servo if it does happ its because the servo is not perfectly 90 degrees and u have gone wrong somewhere in sub trims ...

Okay thank you.
Sure I will try for perfect 90 degree .
And I will let u know if I need the hk servos thanks for the support

Sent from my MB525 using Tapatalk 2

Hi, can u suggest me digital servos from rcdhamaka for cyclic and rudder for 450 heli with avionic x5?
sanwa servos?

http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=89_111&products_id=1191


thanks

I have not used that brand of servo so i cant comment ppl who have used might give u a feedback ...but u will need anything at or below .07 speed rated servo for tail ....get the hk one i told u about or wait for the savox ones then

okay thank you 

hey savox in store go and get urs 

Ya, need to buy thanks..

Sent from my MB525 using Tapatalk 2