kk mini gyro and accelerometer problem

Started by nite, September 22, 2015, 12:49:53 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

nite

having problem with my kk mini board .. please. checkout this video and helpme out my board's gyro and accelerometer vibrates unconditionally is there something wrong with the board or is this normal to all ?????? any kk user here ??

TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

kiran rc

Does the bubble move with respect to tilting of the frame? And also recheck the acc. calibration.

nite

i calibrated accelerometer soo many times but its wobbling and i think gyro is working correct..
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

kiran rc

Does the bubble move along the axis when you tilt the frame? 

nite

yeah .. it responds but don't stabilize at one point (bubble). the bubble dont stabilize at one point it continuously wobbles. it defects my flight i think soo ....  :-\   :banghead:
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

kiran rc

Did you try to reset.What firmware are you using? How did you mount it on the frame? Factory reset may help, or updating the firmware may resolve this issue if the hardware is good. Vibrations and twitches are caused due to several factors.

kiran rc

Another solution is to switch it to stable mode and try.

nite

yaaa broo.. i will upgrade my firmware.. i think that will help
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L