hi,

can i use this for all cyclic and rudder?
http://www.rcbazaar.com/products/1854-savox-sh-0262mg-super-speed-metal-gear-micro-digital-servo.aspx

thanks

no use the above super speed for tail and http://www.rcbazaar.com/products/1856-savox-sh-0264mg-super-torque-metal-gear-micro-digital-servo.aspx super torque for cyclic

thank you 

Hi,

i can use
http://www.rcbazaar.com/products/1856-savox-sh-0264mg-super-torque-metal-gear-micro-digital-servo.aspx
this for rudder

and

http://www.rcbazaar.com/products/1855-savox-sh-0263mg-super-torque-metal-gear-micro-digital-servo.aspx
this for cyclics right

thanks

Quote from: Shannon on April 23, 2013, 07:08:47 PM
no use the above super speed for tail and http://www.rcbazaar.com/products/1856-savox-sh-0264mg-super-torque-metal-gear-micro-digital-servo.aspx super torque for cyclic

hi sh-0264 is a rudder servo they mentioned in description but u said to use it as cyclic servos?

so can i use in this way

http://www.rcbazaar.com/products/1856-savox-sh-0264mg-super-torque-metal-gear-micro-digital-servo.aspx
for rudder

and

http://www.rcbazaar.com/products/1855-savox-sh-0263mg-super-torque-metal-gear-micro-digital-servo.aspx
for cyclic

thanks

i got savox 0263 for cyclic and  savox 0264 for rudder. is that fine?
thanks

hey did u get the super speed servo for the tail right http://rcbazaar.com/products/1854-savox-sh-0262mg-super-speed-metal-gear-micro-digital-servo.aspx this one ??

cause what u have shown me above is super torque u dont need super torque for tail u need super speed

http://rcbazaar.com/products/1856-savox-sh-0264mg-super-torque-metal-gear-micro-digital-servo.aspx

got this one for tail
its mentioned as super torque but if u go into the spec its showing as super speed and suitable for rudder.

and

http://rcbazaar.com/products/1855-savox-sh-0263mg-super-torque-metal-gear-micro-digital-servo.aspx
this one for cyclic

can u see the spec and tell me is this fine?
thanks

for 0262 and 0264
the specs are the same

ya both r good to go  

thank you 
pulse and frequency for these two are not available?

can i use the 0262's pulse & frequency?

no pls ask and use mostly they are 1520 and use them at 270hz but please confirm with rcb or search online

okay thank you

Quote from: Shannon on April 27, 2013, 11:48:05 AM
no pls ask and use mostly they are 1520 and use them at 270hz but please confirm with rcb or search online

i mailed to savox and they asked me to use 200hz for both the servos.
In avionix x5 for swash its fine, it got 200hz but for tail it has 50,165, 270 & 333hz so i can i use 165hz for tail?

thanks