i saw a glitch on the 450 v2 last time, and i dont know how else to explain it.

is it available online? good cheap one. if available locally, which brand?

i find ground the boom is the best and permanent solution  for esd. i have used grafite 33 but could still get a esd

if this is a 450 and u use 35-72 mhz think a about the 450 is very sensitive to noise like from bad bearings aso

I have a belt driven system & I got rid of the servo glitch (elevator & pitch) in my 450 v2 by using WD40 on the tail drive gear (the metal pulley on top) & tail pulley (the metal pulley in the tail unit). Not sure if this is recommended or not.

My first flight in the day would be glitch free, then when i used to put in the next battery pack .... i used to get the glitch

Yes, grounding is the best option.

Ok, I will go with the grounding option. But no bad bearings etc for me, they were newly replaced and it was on a 2.4 G link.

The last one on this product looks like Graphit 33.

http://www.spraywayindia.com/products_screen4.html

BTW, just make sure your 2.4Ghz antenna is not rubbing too much against any CF, that is known to be a bad combination.

ya got it.

but V2 was metal.

shot a mail and got the reply. you can buy it locally if needed.


Hi Vinay,

You can get it at the below mentioned address.

Regards.

Vasant Bhat

=========================================
Mr. Vasant Bhat (Country Manager)
Sprayway India,
1022/141, 2nd Floor, 20th Main,5th Block, West of Chord Road, Rajajinagar, Bangalore-560010
Tel: +91-80-23305573, +91-80-23149409 Fax: +91-80-23307527
Mobile Phone: +91-9886700322
Email: