Hey people if you want bearings of any size or dimensions please call me on 9833923112. I will post some pics of the bearings tomorrow & the rates as well.
no website, but im gonna start a rc tools shop where you would get tools for all rc stuff...it will be in mumbai, santacruz
Do you have thrust bearings with Shaft Dia 4 mm.
Shreekant
This could be very useful. Let me know if you have the following from good brands.
696zz/1560zz (6x15x5)
mr126zz (6x12x4)
6902 polyamide (or any non metal) retainer 15x28x7
Quote from: Rooster on July 27, 2011, 08:29:12 AM
Do you have thrust bearings with Shaft Dia 4 mm.
Shreekant
shreekant u need to give me the specific size for the bearings u required..eg shaft diame. , outer diameter and the thickness of the bearings
How much will rubber sealed(on both sides) 10x15x4 bearings cost?And if you have a ceramic version,how much will that cost?
Quote from: iamahuman on July 27, 2011, 08:20:14 PM
How much will rubber sealed(on both sides) 10x15x4 bearings cost?And if you have a ceramic version,how much will that cost?
will pm u the details asap
regards
jitu
Quote from: iamahuman on July 27, 2011, 08:20:14 PM
How much will rubber sealed(on both sides) 10x15x4 bearings cost?And if you have a ceramic version,how much will that cost?
will pm u the details asap
regards
jitu
alright
Gandhar you gonna test these bearings? :D
I'd love to!!The 10x15x4 bearings will take some abuse in our slashes.
Quote from: jitendra7 on July 27, 2011, 08:19:00 PM
shreekant u need to give me the specific size for the bearings u required..eg shaft diame. , outer diameter and the thickness of the bearings
ID= 4mm; OD= 8 , Let me know if you have you have this
Quote from: iamahuman on July 28, 2011, 08:26:10 AM
I'd love to!!The 10x15x4 bearings will take some abuse in our slashes.
10X15X4 is technically is a size difficult to get as ive asked my all contacts about it the have given me an explanation which is quite digestive, call me for complete details regarding it +919833923112
Quote from: Rooster on July 28, 2011, 08:46:54 AM
ID= 4mm; OD= 8 , Let me know if you have you have this
rooster wat abt the thickness!
Quote from: RotorZone on July 27, 2011, 12:44:46 PM
This could be very useful. Let me know if you have the following from good brands.
696zz/1560zz (6x15x5)
mr126zz (6x12x4)
6902 polyamide (or any non metal) retainer 15x28x7
696zz (6X15X5) will cost u Rs.60per piece but order atleast 10 pcs rs.600
mr126zz (6x12x4) will cost u Rs.105per piece but order atleast 10 pcs rs.1050
both bearings are japanese made...
all rates above are excluding shipping
hey people, the bearings for which u are making an inquiry is all rc related...you know it as well as i do...but my source of getting the bearings is not from a rc person. But it doesnt means that the bearings which ill give give will not be useful. for example recently i purchased a K&B Second hand engine which was very old, so while running that engine it used to leak oil from the thrust washer bearings just behind the propeller, so i removed the bearings replaced the bearings with a new one which i brought from my friend who is not at all in rc business, but that bearing worked fine and the leakage stopped. so guys its just abt those special sizes of the bearings in rcstuff beacuse of which it becomes very difficult to get it in india, but if get u one the its definitely gonna work. please bear with me if couldnt fulfil your requirments. but ill try hard to get it in reasonable prices...