Text only | Text with Images

RC India

RC Equipments => Tools, Materials and Building Techniques => Topic started by: CaptG on March 10, 2014, 08:50:37 PM

Title: CNC in Hydie? (or BLR or DEL)
Post by: CaptG on March 10, 2014, 08:50:37 PM
Hey everyone,

Was wondering if anyone knows where I can find a CNC that will cut aluminum and carbonfiber for me? I had a few ideas on how to mod my s800 and a few other things I wanted to have built, and im also looking for someone who can put my thoughts onto CAD. (curious, from what little I know, not all places that offer CNC machines also have a designer who can do CAD, am I right?)

Im from Bangalore but I live primarily between Hyderabad and Delhi so any of these three cities (pref Hyd since I spend the most time here) would be awesome!

Also while were on the topic of cutting, does anyone know where I can get original Dremel spares in India? The only place I found was eBay but alas I got a knock off chinese box of accessories, didnt wanna risk anything breaking and flying at me so never used them. I remember once seeing a small shop in Mumbai at a complex somewhere near Haji Ali, all sortsa imported tools, but I cant for the life of me remember where! Im looking for something like that, a shop with imported tooling.

Thanks in advance!
Title: Re: CNC in Hydie? (or BLR or DEL)
Post by: Cyberdyne on September 28, 2014, 09:16:08 PM
Hello CaptG,

You should try for the CNC contacting manufacturers in Peenya industrial estate, they are in abundance and you might be surprised. For the Dremmel please check SP road, I am sure you will find some one. On the way to Market there is a big "Panchals Machine Tools" try to on the right side of road.I am sure he will have it.

Thanks,
Cyberdyne
Title: Re: CNC in Hydie? (or BLR or DEL)
Post by: RCNeil21 on September 28, 2014, 09:33:36 PM
I thought cyberdyne had a high tech super computer powered cnc system

Just a joke. CaptG you could build a low cost cnc by yourself
Title: Re: CNC in Hydie? (or BLR or DEL)
Post by: Cyberdyne on September 28, 2014, 11:13:33 PM
Haha that made me laugh......nice one.....planning to build one.

BTW, I am a Mechanical designer and have expertise in CAD and CAE, let me know how can I help you CaptG. If you are interested in an open source CAD software try FreeCAD (its free) http://www.freecadweb.org/ (http://www.freecadweb.org/)

Its free if you need open source free CAE then try NETGEN for meshing and calculixforwin.
Title: Re: CNC in Hydie? (or BLR or DEL)
Post by: Cyberdyne on September 28, 2014, 11:14:43 PM
calculixforwin as a solver for finite element analyses.
Title: Re: CNC in Hydie? (or BLR or DEL)
Post by: K K Iyer on September 28, 2014, 11:59:08 PM
@CaptG
Sir,
Needed Dremel metal cutting discs as originals broke one by one.
Wife found them in London last month, but the price was exhorbitant, so i refused.
Found local replacement for a pittance.
Used only one so far. Could cut through brushless motor shaft cleanly without any burrs.
Got 10, so i can send you a few if you need.
No charge as price is less than the postage!
Regards
Title: Re: CNC in Hydie? (or BLR or DEL)
Post by: saikat on September 29, 2014, 08:43:25 AM
@ Capt G

Mr. Iyer above has spake words of wisdom. Use the local ones without fear.
Its not as if Dremel has its own plant , manufacturing its products.

just make sure that you go for the glass fiber reinforced cutoff wheels.
Title: Re: CNC in Hydie? (or BLR or DEL)
Post by: sahilkit on September 29, 2014, 01:37:38 PM
For Hyderabad

Try balanagar for cnc machine shops (PM if you need help, i get work done for our company). Original Dremel is available from BOSCH out at ranigung (tools & spares)

Sahil



Text only | Text with Images