Print Page - connecting ball links with servo and rotor heads

Title: connecting ball links with servo and rotor heads
Post by: Shyam Hembram on April 19, 2013, 12:10:31 PM

anybody help me,I m unable to

connect the linkages with rotor heads and servo
I tried it but could not push the ball nuts into the linkages further .

:headscratch:

Title: Re: connecting ball links with servo and rotor heads
Post by: laxmansuthar on April 19, 2013, 02:04:54 PM

hi,
link for your help..Cheer :thumbsup:
http://helifreak.com/showthread.php?t=417802
http://www.rcgroups.com/forums/showthread.php?t=1204637

laxman

Title: Re: connecting ball links with servo and rotor heads
Post by: avesh on April 19, 2013, 06:20:16 PM

check fitting both the sides. Still having no success you need to burn a bit of ball links but its not common.

Title: Re: connecting ball links with servo and rotor heads
Post by: rajathv8 on April 20, 2013, 12:09:11 AM

How did you try to "push" the links onto the balls?
Did you use a ball link plyer? :)

Title: Re: connecting ball links with servo and rotor heads
Post by: Shyam Hembram on April 20, 2013, 01:09:57 AM

no I dint use any pliers,did simply. by hand ,please show. me some pics of that pliers

Title: Re: connecting ball links with servo and rotor heads
Post by: rajathv8 on April 20, 2013, 10:25:51 AM

You can google "Ball link pliers" :)

RC India

RC Equipments => Tools, Materials and Building Techniques => Topic started by: Shyam Hembram on April 19, 2013, 12:10:31 PM