determining the coroplast lightweight sheet.

Started by ashwini06, April 18, 2014, 01:33:08 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ashwini06

I am going to make a plane with help of coroplast, i have assumed that, i shall maintain it's weight till 1.5kg. In market, there is so many types of coro sheets are available, according to its properties like strength and weight. As soon as we increase its weight it's strength also increases, so here is requirements of strength not weight.
Anybody please suggest me, what type of physical property should we accept to make our plane more stronger and lighter?  ??? ???

johnywalker8pm

Ashwini .

Go through sanjayrai55 sir's posts. He is the highest degree holder in coro build..  :hatsoff:

You will have a fair and detailed idea about coroplast..




sanjayrai55

Which types of corro do you get in Mathura?

KALYANPRODHAN

I use 3 mm coro. Density is 0.25 g/sq inch.
So you can simulate the weight of the airframe and simulate CG using basic moment calculation.
like http://www.school-for-champions.com/science/gravity_center.htm#.U1B4PKIa0yQ
Thanks
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

v2 eagle

The custom is 3mm coro for wings and 5mm coro for fuse. alternately small electrics can go for 3mm fuse and wings.
Strength comes from the way you use the flutes in the sheet. align them with the way the plane experience the stress.

Ashok.P
FPV with head goggles

http://ashokpkumar.wix.com/mysite

topalle

Chordwise for wing and length wise for fuse right?
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

v2 eagle

Spanwise for wings and length wise for fuse.
FPV with head goggles

http://ashokpkumar.wix.com/mysite

ashwini06

#7
Mr. Sanjayrai55;
In Mathura, there is no any source, but i am approaching to a industrial company name is ' nilanchal poly extrusion company'. it manufactures coro sheets at large scale, but they have so many variety. they selling it in unit of GSM i.e gram per square meter.
But i want a definite, predetermined coro sheets information, which is specially use for making rc plane. And available in north india.

ashwini06

V2 Eagle,
sir, i can't get you, can you tell me in detail, please.

VC

Growing old is mandatory, growing up is optional!

v2 eagle

Dear ashwin,

pick up the one that feel the lightest. Dont go for too much calculations. when you bend the coro for building the strength will get doubled and will be more than enough for RC use.
There is one more coro variety that looks translucent and looks a little ivory in colour. it is a superb material, light, strong and can be easily cut/bent. if you can get that one you should be lucky.
I once had a A4 sized sheet that came as a bottom padding for some electronic equipment inside the packing. showed the sample to many dealers but never got the same material. its very thin like 2mm but stronger like kevlar.

Ashok.P
FPV with head goggles

http://ashokpkumar.wix.com/mysite

SAM86

Hi Guys I am in in RC hobby, I found a website which is shipping Depron foam

http://dhirajrc.blogspot.in/p/material-sources.html

rcrcnitesh

Maker | Aeromodeller | Teenager

maahinberi

Hi ashwin, if you want coroplast in smaller quantities, I would suggest looking for shops that do Signboard printing. They use coroplast to print on. They would be willing to sell you even 1 or 2 sheets. A sheet of 3 mm coro which is 6x4 feet should not cost you more than Rs.150-200. As said before, 3 mm and 5  mm are most commonly used, however, if you find 2 mm and 4 mm, that would be a better combination (As your plane would turn out to be lighter, but still strong enough).
Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.

abhishekdas11

i used 3mm coro for wing ribs and 2 dipsticks from four-wheeler vehicle as L.E spars and butter papers for wing skin. succeeded to make a blended wing; and the stuff came out to be awesome with a high endurance of glide and awesome wingflex