Print Page - GLUE FOR MULTILPLEX

Title: GLUE FOR MULTILPLEX
Post by: santhosh on July 24, 2009, 09:37:55 PM

Hai sai
try to stock some form safe thick CA and form safe activator as they are the preferred method for gluing the multiplex products

santhosh

Title: Re: GLUE FOR MULTILPLEX
Post by: rcforall on July 25, 2009, 06:03:19 PM

Hi santosh ,
thanks a lot for the feed back
i had Zaki Elapor specially good for Elapor .
I will be getting Zap PT 25 soon.

Sai

Title: Re: GLUE FOR MULTILPLEX
Post by: anwar on July 25, 2009, 08:49:51 PM

I think this can go with the Evotite you are carrying currently (Hobbycity also has Evotite).

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8456&Product_Name=Insta-Set_CA_Accelerator_2._oz

BTW, ZAP is the most widely used CA, it seems. It is everywhere in the various hobby stores outside India, in many countries.

Title: Re: GLUE FOR MULTILPLEX
Post by: santhosh on July 25, 2009, 10:03:28 PM

evotite is a thin type CA

Title: Re: GLUE FOR MULTILPLEX
Post by: santhosh on July 25, 2009, 10:11:52 PM

evotite is a thin type CA and is not suitable for elapor foam, i got my finger burned when i used evotite with activator, but no such issues when i used a greatplanes foam safe THICK CA with activator

santhosh

Title: Re: GLUE FOR MULTILPLEX
Post by: kplkum on November 14, 2010, 02:58:34 PM

which glue i can use on tharmocol sheet

Title: Re: GLUE FOR MULTILPLEX
Post by: Rao on November 14, 2010, 06:27:44 PM

Quote from: kplkum on November 14, 2010, 02:58:34 PM
which glue i can use on tharmocol sheet

For Thermocole, one can use Foam Safe CA, Epoxy, and Fevicol White Glue etc

RC India

RC Equipments => Tools, Materials and Building Techniques => Topic started by: santhosh on July 24, 2009, 09:37:55 PM