is the painting of coro work with spray paint?
Avoid paint. Use sign vinyl
Why don't you use coloured tapes.? Painting would add weight..
Sign vinyl is better. You are not limited by the width of a tape.
Panting does not create problems with weight. It is more a problem of adhesion.
well... the solutions are:-...
Paint.. it is a pain to get the lines straight... one has to be very careful with straight lines and curves... the drying time is too large and one feels helpless waiting for it to dry
Coloured tape... It is very light and a good way to colour your model... the flip side is that wherever there is an overlap of tape sheet the colour tends to be darker or deeper.... making coloured curves are a pain and one ends up using paint to give the effect..
Vinyl sheet.... Ideal... large sheets or pieces.... can be cut directly into the shapes required... sticks well and gives a neat and clean finish.... cost wise... slightly costlier than paint or coloured tape.
I use all three things.... it depends what amount of time I have and what is the urgency of preparing the model.... My earlier two models were covered with coloured tape and the last one is being covered with Vinyl sheet.
Happy making your model and giving it a good colour scheme....
i gonna paint or vinyl it black.one problem is the lack or vinyl sheets in my place
Well dear Khan.... to buy your vinyl sheet of whatever colour you want.... go to the shop which makes vehicle numberplates from stickers and not paints them... The stickers are made of vinyl sheet... these sheets are generally 2 feet wide and you can buy nearly whatever length you want... the cost ranges from Rs 20 per sq foot to Rs 50 per sq foot... I use the one at around Rs 25 per sq foot.... Go ahead and buy your vinyl sheets... ALSO... do not paint your model black as it is not visible well enough when flying... always colour them in bright colours.... I prefer them bright yellow or red or white or orange and such colours...
thanks for the info friends
I got my Vinyl sheets today at Rs 20 per Sq foot.....
hey shobhit is vinyl sheet which you buy is only available in black colour??
i have seen it in lot of colours friends .srry for missunderstanding.the reason was i didnt even know it was the vinyl sheet...idot..does that stick well with coro?.any problem when exposed to sun for a lot of time?
It lasts long and adheres well to coro. The vinyl on my bike and plane still looks new after so many years!
:hatsoff:
friends did u ever tried painting ur plane black?how was the result?
khan007: i have used those vinyl for many coro models, it sticks well. :hatsoff:
http://www.rcindia.org/electric-planes/mini-avispad/ (http://www.rcindia.org/electric-planes/mini-avispad/)
awesome job budy.a big hat off.u roCkZ
thanks khan :)
Great paint job friend...
thanks Shobhit sir :hatsoff:
friends which is spot and orientation a plane.black coloured? Or white
Black is the worst for orientation. Use a bright base, like white or yellow and use a bright contrasting colour (like red, blue or orange) to make patterns and stripes etc.
It is also suggestible to make different patterns at the top and bottom. This helps you figure out which side is the top of the plane while flying.
Best of Luck :thumbsup:
thanks maahinberi