hello RCINDIA

can i know that which Glue to use on Multiplex EasyStar.

See the bottom part of this thread :

http://www.rcindia.org/tools-materials-and-building-techniques/cyano-accelerator/

Also this :

http://www.rcindia.org/deals-and-special-offers/multiplex-kits-from-rcdhamaka/msg46253/#msg46253

Hi all
As far as i know..you can use normal CA (not necessarily foam safe) as well as epoxy on EPO.

Regards
Ankur

Bala on this forum recently used the normal CA to fix the nose and Motor Pod of his Easy*. ELAPOR Rocks!!

Get Fevi kwik 702 if you can http://waamall.in/Product38819793-b8a4-4ade-b7fa-0ef378a2f877.aspx
other wise you can always use Fevi kwik 203 http://waamall.in/Productf4598448-96ad-4ad1-8e92-cc2ab26bbc9f.aspx

Edit: Corrected second link.

Awesome site dude, it has all the glues and screws and thread-locks we require in the hobby.

Some nice threads..

Canopy Mod - http://www.rcgroups.com/forums/showthread.php?p=3519771
The brushless Upgrade - http://www.rcgroups.com/forums/showt...8&postcount=39

A good thread -

http://www.rcgroups.com/forums/showthread.php?t=144078

Thanks to all

special thanks to Atul for 28 Tips.

THANK YOU Atul &  SunLikeStar (I am shouting intentionally), I kept my acromaster aside, with a fear of glue malfunction, Another True Forum Hero

PS
It is a different issue, as I still can't fly it, waiting for Power Pack and Servo Pack

No problem at all. Although it has come to my notice that some of the links are not working

I will search for more and post, as and when I get them.

Augustinev Sir..Something for you..Check this out..

http://www.rcgroups.com/forums/showthread.php?t=588149&page=4

Quote from: Sanjeev Shah on January 26, 2011, 10:09:48 AM
Please do not you epoxy as it does not bond the elapor but on the long run hardens and creates a layer where in you can peel it out.

That is interesting... wonder if it depends on the type of epoxy. 

So all it takes is just about any CA (foam safe or not) ?

Quote from: Sanjeev Shah on January 26, 2011, 10:09:48 AM
Super Glue is also called cyno & in India we have brands like fevi kwik, locktite and metlock etc.
Get a medium viscosity one. Please do not you epoxy as it does not bond the elapor but on the long run hardens and creates a layer where in you can peel it out.

Are these brands FOAM SAFE? because in my understanding CA is not safe for foams. it burns right through them.

Atul, is there a Emoticon for expressing gratitude other than for this    like  :kiss: thanks a lot for this link, will be of gr8 help.

lol. In btwn am married  

No problem Augustinev. Will try my level best to give you more links..

Cheers..Take it easy..

I have two acrylic spray cans and i am itching to paint my easy. Atul you painted your last easy right?  Any tips and suggestions about that?

Well not that I can think off.. Just spray away..

And for new easystar owners who are afraid that they might mess up while joining the two half's. Dry fit the two half's together and hold it with some tape, now just run some thin CA on the seams. Thin CA like Fevi kwik 203 automatically runs into seems and forms a bond. You cant go wrong with this method

i tryed the CA 203 (fevi kwik) on thermocol. it made hole in the thermocol 

Try Fewi-Kwik 702. That works..

Quote from: Nehutech on January 28, 2011, 01:35:36 PM
i tryed the CA 203 (fevi kwik) on thermocol. it made hole in the thermocol 

Easystar is not thermocol its ELAPOR

Check this thread on how to fix the servos on easy star

http://www.rcgroups.com/forums/showthread.php?t=975833&page=874

My easystar with a shiny new paint job and a modded coro elevator

a friend had 1 and on that 1 we cut the ends off the wings and put ailerons  flaps on the wings and cut in a flat carbon strip in the wing and a total overkill motor

it flew pretty good and fast for a while until the wings folded up in flight