Need Help in Setting Up Third Rc Plane
Guys ive thought of going for this
http://www.hobbyking.com/hobbyking/store/__16542__Hobbyking_Bixler_EPO_1400mm_RTF_Mode_2_Throttle_Left_Radio_.html

THE HK BIXLER RTF - The package seems worth the buck
so gonna be placing the order in the next few days.
and i need help on which glue to use since its epo
i could go for evotite foam safe ca glue and accelerator but think its too expensive
so which of the following can i use
1) Fevicol
2) Araldite
3) Quick-Cure 5 Min Epoxy 4.5 oz (http://www.hobbyking.com/hobbyking/store/__8684__Quick_Cure_5_Min_Epoxy_4_5_oz.html)

Or any other glue?

and the plane is of EPO foam

You may use
BondTite TimeSavar (Clear)- 1 Minute Epoxy
BondTite Rapid - 3 Minute Epoxy

Both are FoamSafe.

But CA (though claims as FOAMSAFE, I Differ as sometime, it may ate. And if you want to use CA, stick cellotape and then CA so that both side foam can not come in contact with FOAM.

Thanks.

Where can i buy
BondTite TimeSavar (Clear)- 1 Minute Epoxy
and
BondTite Rapid - 3 Minute Epoxy

I have used CA on EPO foam , no problems . Even after 3 hard crashes , the parts are held tightly with CA !

u must have used foam safe ca

In any Hardware Store. (Not Computer Hardware Store).
Just Search in Local Stores.
You may get Lot More.
And also search for CA available (Medium 460). [Always keep CA < 20^O C ]
And test. EPO Foam is safer with CA special Medium. But Not EPS.

Thanks