hello everyone i make rc plane by depron .. 

but jab plane ud rha hota h to plane k wing mud jate h ..
i have no carbon road ..
mujhe iska koi simple sa soluation chahiye ..
please help me ..

sorry for useing hindi ..
becuse i cant speak english..

Collect a piece of packing material wood.... some wood which comes with good quality machinery or wood like Teak. Go to the local carpenters shop.... which has a round wheel cutting saw on a cutting board.  Get spars cut of 4 mm x 6 mm or 4 mm x 8 mm.  Make a groove in the wing and fix them inside the groove with epoxy.

Your wing will be really stiff and not bend.

how much weight og this wood ...
but i am using bambu pol but it cant work ...

or you can use aluminium T-section or 10mm diameter aluminum rod. You'll get it easily on any hardware store for Rs.10-15 per feet.

thank you but another one problem is ..
jab me plane ko udata hu to vo dhire dhire  gol gol gumane lga ...
kya is problem ki vajah kya hai ...

"gol gol gumane lga ..."  ? you mean to say it was taking rounds or any left/right turn in air?

yes right side

yes right side

yes sir ..

its trun to the right side in air

please show us some pictures of the model....there can be many issues....

but first check the control surfaces

There could be many reasons for this. Simplest being slight movement of the aileron or might be the servo was not properly centred or also could be due to unbalanced weight.
Please post a few pics of the model.

i am not useing elevater and ruder ...

Your model does not has any control surface.. aileron, elevator or rudder?
You mentioned that you make RC airplane.

man I would love to see a rc plane without aileron, elevator or rudder.....if it flies at all :P

but sawal lakho ka.....plane ko control kaise kar rahe ho

oh sorry ...
my mistake


i am using elevater and ruder ...
but not aileron ...

sorry for this ....

rakesh ji ....aap apne plane ka photo yahan post karo...koi na koi zaroor help karega

ok i sending photo ...

waiting for the photo.

this is

and another one is

ak or photo

ak or photo

@rakesh_suthar,

Bina aileron wale model ko wing dihedral ki zaroorat hai.
Yani wing ke dayain/batain kinare (wing tips) wing ke centre ke mukable ooper hone chahiyain.
Photo se samajh aa jayega.
Dono taraf lagbhag paanch paanch ya cheh cheh degree ki koshish kijiye.
Wing ke do tukde jaroor karne padenge!
Joad ki majbooti ke liye ek ply ka tukda katna padega (ise dihedral brace kahte hain, photo number 3)

Best of luck

pahle pic se lag raha hai ke wing , fuselage par tedhi rakhi hai.

thank you mere bhai ...
me is problam ke karan plane ko abhi abhi ped se utar kar laya hu ...
thank you for help me ....