Guess one must be solder a whole LOT of connectors to get this !

cool jig!!!

I saw some thing like 'Brute Made in USA' Chevy to this Jap-Honda jig:

http://www.rcgroups.com/forums/showthread.php?t=1243777&highlight=jig

BTW I use wooden block with 2mm/3.5mm/4mm holes and a "Hand-free item holder Tool" (below link )do these things better them. Would share vid some time.
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10615

I have the same thing (came as a part of the basic soldering equipment set), but they are still a bit clumsy to use, compared to this.

Before, that I rigged up couple of memo holders like these (got them at some professional conference as advertisement from some manufacturer) :

http://www.made-in-china.com/showroom/lhpinbo/product-detailhaExLXQbuYBr/China-Memo-Holder-Name-Card-Clip.html

@Anwar
Dear Anwar Gi, Any idea from where I can order one (the one in your Video)

http://www.infinity-hobby.com/main/product_info.php?products_id=6377

Thank you.. My soldering is 

25 USD  

I use wise and it works like charm  

and HobbyKing soldering arms when more wires need to be soldered!

Here is the HK Soldering arms in action.

http://www.rcindia.org/radios-and-receivers/assan-ing-the-rds8000/msg20584/#msg20584

U can get one at ur local electronics shop.

Quote from: vinay on November 20, 2010, 07:15:52 PM
I use wise and it works like charm 

The wise does not allow you to solder two wires like this (unless you have two of them close to each other ?  The soldering arms will work, at the small hassle of keeping the aligned.

And yes, this thing should not cost more than $2 (when a Jackly 36 piece screw driver set is only Rs100) !!!

Quote from: anwar on November 20, 2010, 09:03:05 PM
And yes, this thing should not cost more than $2 (when a Jackly 36 piece screw driver set is only Rs100) !!!

hahaha True, I think I will go for the Good old Hobby king one...

Shipping expensive. I got it coz I had 3 KG parcel full of tools coming my way from HK and the shipping got cheaper.

Note that soldering 2 wires using a soldering arm is also a hassle. I usually put 1 wire on the wise hold another in my hand and use the other hand to solder.

ummmmmmmm.....    more survey required