I can attach the photos, but not the wheel itself .

Anwar sir, 3D attachment with the forum is still pending. It can be done with sterioscopic picture.
But the real attachment in virtual forum I am helpless.

good work, what is the AUW and power set up for MIG , because i am also making this currently? pl share..

Still i could not try first flight. Then i m trying to using emax 1200kv motor with APC 7*6 prop,  30amp turnigy esc and 2200mhz bettery. When i test first flight i will take video.... Thank u...

Taitil,

very much interested in this method.

I was searching this material in Coimbatore local market, the area for leather works. Found some rubber sheets used for shoe insole. its rubber sheet, but the thickness around 4mm or 5mm.
Then searched in one of the rexine material selling shop, where I found one rubber sheet of this much thickness but very sturdy and not a flexible one!

Which kind of shops sells these material?

From your picture I guess the thickness is around 8mm or 10mm, right?

Regards,
Dileep 

Yes Dileepbhai and friends the black sheet is shoes inner sole. Though i have 4×8 feet sheet which uses in my bussiness. Then You will get it from shoe maker. May be they have not 8 to 10mm but u can make it as your uses....

Quote from: taitil on December 18, 2012, 10:10:06 PM
Yes friends this glue or adhesive is very cheap and strong sticky. But remember this glue ia enemy for thermocol. So friends try to use  this glue and techniqe for coro plane, it makes magic...

So what would you recommend to use for Polystyrene / Thermocoal / Depron?

FEVIBOND ?? or FEVICOL ?

If POLYGRIP is not foam safe.Is PU 30minute expanding adhesive available?

I have a few RC friends in USA. In America they use "Amazing Goop";

http://eclecticproducts.com/all_purpose.htm 

http://www.amazon.com/Amazing-All-Purpose-Household-3-7-Ounce-130012/dp/B0000A605I

http://www.homedepot.com/p/Amazing-Goop-3-7-fl-oz-All-Purpose-Adhesive-140211/202533796#.Umf3-1Mt67o

We use mainly UHU Por which is a German product and Gorilla Glue which is a bit expensive but an amazing product... I think I will expand on adhesives in Adhesive thread..

Hello Taitil,

Nice thread. You tried this adhesive method for glow models ?

Also which Polygrip adhesive is this ? there are quite few model while searching online.....Plus 909 or S 709 or MP 609. Please share pricing of the glue and rubber inner sole sheets.

Thanks
Sahil

Very good taitil you describe very useful hint