Print Page - Putty / Filler for foam models

Title: Putty / Filler for foam models
Post by: gauravag on April 16, 2012, 11:20:02 AM

Guys,
Just wanted to know what Putty / filler you use on your foamies.

I have seen a lot of people abroad use Lightweight Spackle
Something like http://www.dap.com/product_details.aspx?product_id=61

Know of any good equivalent stuff, in India ?

Title: Re: Putty / Filler for foam models
Post by: foamybuilder on April 16, 2012, 12:50:10 PM

search foam putty in ebay.com. you will get for around 10 or 20$ i guess.

Title: Re: Putty / Filler for foam models
Post by: gauravag on April 16, 2012, 01:52:00 PM

Well yes, Ebay has the follwoing:
http://www.ebay.com/itm/FOAM-PUTTY-Woodland-Scenics-16-ounces-1447-/220950189800?pt=Model_RR_Trains&hash=item3371a856e8

Interesting that we dont have a comparable product in India !

Title: Re: Putty / Filler for foam models
Post by: spitfire on April 16, 2012, 03:17:31 PM

I have seen people using something called Tuffix in Pune. but didnt found it here in Kanpur

Title: Re: Putty / Filler for foam models
Post by: gauravag on April 16, 2012, 03:21:29 PM

Is that not PolyUrethane though ? Must be heavier than putty.

Title: Re: Putty / Filler for foam models
Post by: AEROVISHWA on April 16, 2012, 08:03:03 PM

this is the tuffix....

http://www.rcindia.org/tools-materials-and-building-techniques/new-glue-on-the-block/

RC India

RC Equipments => Tools, Materials and Building Techniques => Topic started by: gauravag on April 16, 2012, 11:20:02 AM