Help with DIY hot wire cutter

Started by prabal276, July 19, 2015, 04:41:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

medicineman1987

#25
July 21, 2015, 12:52:11 AM
Look bhai, the only reason i'm telling you to use a transformer is so that you can control the heat easily with a fan regulator like i did. Its available at any electronics shop.  Moreover you live in Delhi.  You will be able to find all the parts easily at your local electronics shop.
"The day you stop playing with your toys is the day you start getting ready to die.."

FlySky 9x (with ER9x,  backlight mod &  dual module hack) | Futaba SkySport 4VF (with 5th channel hack) | Glidiator - scratchbuilt 60" electric glider | SkySurfer | Scratchbuilt Tricopter | FT Nutball |  .46 Glow trainer (electric conversion in progress)

prabal276

#26
July 21, 2015, 06:34:51 AM
Ok,
ill go today eve. I need 12v. 5amp right??

prabal276

#27
July 21, 2015, 02:25:53 PM
Hayyy??

Swapnil

#28
July 21, 2015, 05:13:39 PM
12V 5A will do the job. But, please be cautious while handling it if you haven't worked with these things before.

Propfella

#29
August 29, 2015, 07:10:09 AM
I used an old car battery charger, It was rated at 5 amps but I was lucky to get 2 amps out of it. I had no problems cutting thick foam with it and I also used it for my rust removal setup.

"Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind."
Print
Go Up Pages 1 2 All
User actions