Hello rcindia.finally decided for corbuild and wid great help from VC SIRSIRbut I have some quries.
1.what basic tools do I need for spAd (coro)build?
2.what would be the bes 8-)t spad for following electronics I have?
4*9g servos ???
3s 11.1V 2200 mah batt
1 20 amp esc
2600 kv motor
3.do I needb :oalsa for wings?
Craft knife + extra blades, Hot glue gun, sand paper (120 grit), Fevitite Rapid epoxy, Stainless steel Scale (One metre length) / or any other straight edge for cutting, Bicycle spokes, a pair of Pliers, ordinary sewing thread, a semi blunt metal object like a spoon handle (for scoring coro).
With what you have, you can build something like the Avispad (you may need to scale down all dimensions to 75% of the original). You will also need a 6 x 4 prop, prop adapter and a pair of wheels.
No, you don't need balsa for the wings - reinforced coro will be enough.
Oh thanks again vc sir.u sure of these things coz m gonna shop tmrw?no cutter?
Craft knife = Cutter.
Oops didn't see that
Changed the topic name to readable/searchable English.
will spadet be a good one for my elecs.?
VC do you not use CA for coro builds? To me it seems to be the best (lightest) glue for joining two coro surfaces flush. One tiny drop per square inch(thoroughly sanded and degreased) result in unbreakable bonds for me..!
:banghead: I knew I had missed something!
Last rites, you pointed out the most important component. Sandpaper is used to roughen the contact surfaces so that CA (Preferably Industrial CA like Flex Kwik) can adhere better. Thanks! :thumbsup:
The basic needs in my hanger to build a coro-plane are
Glue
1.Hot glue
2.cyano 202
3.Araldite
basic working tools like
1.table wise
2.Soldering kit
3.nose and cutting player
4.wire cutter
5.screw driver ( - and x )
6.scale
7.set square
8.scissors
9.button knife
10.emulsion sheet ( fine and rough )
11.Marking sketch
12.file
13.hacksaw
Do i wanna add more tools . . . ?